3M™ Scotchcast™ Electrical Resin 2123 is a soft, 2 part polybutadiene resin encapsulant. This resin has good handling and performance characteristics and is formulated for re enterable splice protection. This multi purpose, moisture sealing resin bonds to nearly all cable jackets.
- Typical hardness (ASTM D2240) - 0 Shore A
- Has 62-minute gel time at 73 °F (23 °C)
- Useful for sealing and electrical insulation in potting applications.
- Withstands a temperature range of 32 to 194 °F (0 to 90 °C)
- Elongates 300% longer than its original size for easy insulation or wrapping
- Rated up to 1 kV
- RoHS 2011/65/EU Compliant
Brochures, Catalogs & Data Sheets
- Pdf Catalogs_3m cable accessory pr
- Data Sheet
- Safety Data Sheet
For industrial/occupational use only. Not for consumer sale or use.3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
3M™ Scotchcast™ Electrical Insulating Resin 2123 has good wetting and low viscosity properties. This flexible resin ensures curing at room temperature and acts as an insulating material for cable splices operating up to 1 kV. It flows easily, even at low temperatures, while filling the enclosure and minimizing voids. ASTM Approved and RoHS 2011/65/EU Compliant. Add to cart