Scotch-Brite™ Metal Finishing Wheel combines conformability with consistent abrasive cutting action to provide uniform brushed stainless and satin finishes. The Metal Finishing Wheel is also used effectively to blend and match #3 or #4 mill finishes on stainless steel and to create brushed or satin finishes on items such as cutlery, appliance trim, builders hardware, and plumbing fixtures.
- High conformability and uniform wear provides consistent cutting power to produce superior satin, mill and brushed finishes
- Open-web construction resists loading and runs cool to provide professional results on stainless steel, brass, aluminum and other metals
- Controlled abrasive action helps prevent undercutting or gouging
- Highly conformable wheel effectively finishes irregular or contoured surfaces
- Convolute construction wound around a fiber core runs smooth to provide fine, uniform finishing
|Diameter||12 in||304.8 mm|
|Maximum Speed||3,000 rpm|
What is the Scotch-Brite™ Metal Finishing Wheel?
The Scotch-Brite™ Metal Finishing Wheel MF-WL 5A Medium is a great addition to any metal finishing toolkit. It offers consistent finishes while doing away with other conventional abrasives.
What are the dimensions of the wheel?
The dimensions for this particular wheel are 12 in x 2 in x 5in.
How many wheels come with each case?
Each case contains one unit of Scotch-Brite™ Metal Finishing Wheel, MF-WL, 5A Medium, sized at about 12 in x 2 in x
Can it be used for different kinds of metals?
Yes! Our products can be suited from cleaning and smoothening aluminum dies to finishing steel surfaces installed on industrial vehicles.
Will this product work with my grinder?
Scotch-Brite™ Metal Finishing Wheel is a highly conformable wheel that is convolutely wound on a core to run smoothly and help create professional finishing results. It is used on softer metals like aluminum, copper, and brass to blend out minor surface imperfections and handling marks while providing the desired decorative finish on products such as builder's hardware and plumbing fixtures. Typically used on stationary machinery, the wheels are available in diameters of 6 to 16 inches and widths of 1/2 inch and greater. This product is available in grade CRS and MED.
The wheel uses aluminum oxide abrasive, which is widely used in grinding applications due to its high cut-rate, hardness, strength, and low heat retention. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.