Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
SKU 7000046756
Legacy SKU 66000001298
UPC 50051115325293
Part Number 827520

Standard Abrasives™ Industrial Scouring Hand Pad is designed for hand applications such as deburring, polishing, cleaning, finishing, and surface preparation on metal, composite or plastic surfaces.

  • Built for tough cleaning and scouring applications
  • Sharp aluminum oxide mineral removes light oxidation and rust
  • Tough and durable high grade resin system stands up to wear and tear, prolonging abrasive service life
  • May be used dry or with solvents or water-based detergents
  • A good alternative to steel wool, files, scrapers, wire brushes and sandpaper sheets
  Add to cart
On it's way to you October 10   


Minimum Order 1 Case
Order Increment 1 Case
  Easy To Use
  Fast, Global Shipping
  Industry Low Price
Product Dimensions
Imperial Metric
Width 6 in 152.4 mm
Length 9 in 228.6 mm
Shipping Dimensions
Weight 4 lb
Length 22.5 in
Width 9.625 in
Height 6.563 in
Color Green
Grit Non Pertinent


  1. What is the Standard Abrasives™ Industrial Scouring Hand Pad 827520 made of?

    The Standard Abrasives™ Industrial Scouring Hand Pad 827520 is made with non-woven nylon fibers, coated with abrasive grains and resin.

  2. Can I use these hand pads on stainless steel surfaces?

    Absolutely! These hand pads work great on metal and stainless steel surfaces. They are particularly effective in removing rust, corrosion, and other stubborn residues.

  3. How long do these hand pads last before needing to be replaced?

    The lifespan of these hand pads depends on a variety of factors such as intensity of usage, surface type, etc. However, they tend to perform well for an extended period of time - you can trust that each pad will hold up for several cleaning or scouring tasks before it needs replacing.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Recommended Applications

Standard Abrasives™ Industrial Scouring Hand Pad is a partner in ridding substrates of blemishes, light oxidation and rust. Commonly used in industrial cleaning and scouring applications, this pad may be a helpful abrasive to operators across industries, including the food service industry.

A Steel Wool Alternative

Standard Abrasives™ Industrial Scouring Hand Pad is an excellent substitute for steel wool, files, scrapers, wire brushes, and sandpaper sheets. The high-grade resin system is strong and durable, yet the open web is soft and pliable. The nylon fibers on the pad will not splinter, as steel wool tends to do, which helps enhance operator comfort and safety. The fibers are interspersed with sharp-cutting aluminum oxide mineral, a sharp and friable mineral that fragments under heat and pressure to reveal sharp cutting edges. While nylon fibers break down, fresh mineral is exposed, so the abrasive cuts sharper for longer. Applying even and persistent pressure reveals a consistent scratch pattern. These nonwoven fibers are also spongy and responsive, minimizing gouging or marring of the workpiece.

Ease of Use

Standard Abrasives™ Industrial Scouring Hand Pad may be used dry, with solvents, or with water-based detergents, depending on application and project needs. Using these compounds may help wash away unwanted swarf and debris while you clean. Moreover, the hand pad may be fastened to a hand pad holder (sold separately) to enhance grip and help reduce operator fatigue. The 6 by 9-inch pad may also be cut and shaped to fit smaller surface areas if desired. With up to 60 pads per case, the need for ordering replacements may also be reduced. Standard Abrasives™ Industrial Scouring Hand Pad effectively cleans and scours away contaminants, helping you achieve desirable results.

Brochures, Catalogs & Data Sheets