Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
SKU 7000046838
Legacy SKU 66000006446
UPC 00051115330438
Product Number 811127

Constructed of spongy and responsive open web, Standard Abrasives Type 27 Cleaning Pro Disc is ideal for ridding your substrates of surface imperfections and contaminants, because it will cut aggressively without gouging or denting the substrate.

  • Swiftly cleans and blends welds and removes a variety of surface contaminants
  • Coarse grade silicon carbide cuts sharp but leaves a fine finish
  • Resin-reinforced for added strength and durability, especially during edge work
  • Open web is spongy and responsive, helping to minimize gouging or denting of the part
  • Open web is load resistant, minimizing buildup of debris and prolonging abrasive service life
  Add to cart
On it's way to you April 8   

Qty

Minimum Order 5 Items
Order Increment 5 Items
  Multi-Functional
  Versatile Across Industries
  Easy To Use
  Fantastic Price
Product Dimensions
Imperial Metric
Diameter 4-1/2 in 114.3 mm
Center Hole Diameter 7/8 in 22.098 mm
Shipping Dimensions
Weight 9.5 lb
Length 23.75 in
Width 9.625 in
Height 5.125 in
Color Blue
Thread Size Non Pertinent
Maximum Speed 10,000 rpm

PRODUCT FAQ

  1. What material can I use the Standard Abrasives™ Type 27 Cleaning Pro Disc 811127 on?

    This particular disc is formulated to work especially well on stainless steel, but it can also be used with other metals and alloys.

  2. What kind of cleaning tasks is this product suited for?

    The 3M Standard Abrasive Type 27 Cleaning Pro Disc is designed to tackle a variety of cleaning applications including removing rust, paint, and corrosion in addition to general industrial maintenance and repair (MRO) grinding tasks.

  3. Will this disc fit my grinder's arbor size?

    Yes, the Standard Abrasives™ Type 27 Cleaning Pro Disc has a diameter of 4.5 inches, a thickness of half an inch and fits grinders with a standard-sized arbor that measures seven-eighth inches.

  4. ; How long-lasting are these discs?

    This all depends on several factors such as workload application by users however our customers have reported that the ceramic abrasive technology lasts longer than aluminum oxide–based abrasives

  5. ; Can I use water with these discs during surface preparation or finishing applications?

    Yes - you can. These discs utilize open-web construction (a matrix made up of many small fibers) which allows abrasive grains run towards the disk’s edges while water prevents heat buildup from occurring thus increasing its cutting capacity when wet .

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Swiftly Remove Surface Contaminants

The weld ripples, spatter and discoloration that result when fusing or joining metal parts are a natural consequence of a job well done. The Standard Abrasives™ Type 27 Cleaning Pro Disc was designed to take your hard work one step further and remove the unwanted blemishes that may result from welding or other applications.

Standard Abrasives™ Type 27 Cleaning Pro Disc combines silicon carbide mineral and non-woven nylon fibers using a resin bond. Additional grain and resin reinforcement heighten the abrasive's aggressiveness, so it won't fray on workpiece edges. Among abrasive minerals, silicon carbide breaks down faster than aluminum oxide but is coarser and harder, so it can cut swiftly. These characteristics make it well suited for rapid removal of surface contaminants. The abrasive is ideal for blending and cleaning welds, removing corrosion, rust, scale paints, varnishes and sealants from the substrate. Perhaps the most desirable feature of all, it produces a fine finish on the workpiece.

Benefits of Open Web Abrasives

The spongy open web that comprises Standard Abrasives™ Type 27 Cleaning Pro Disc is buoyant and responsive. It's flexible enough to respond to surface imperfections without gouging the part and its ability to react helps it move in, over and around difficult to reach surfaces. The non-woven nylon fibers break down slowly, because they are resin reinforced. As the fibers break down, new abrasive mineral is exposed so you get a consistent cut – part after part. Moreover, gaps in between the fibers allow swarf to escape, so debris won't clog the abrasive. Preventing wear from loading helps prolong abrasive service life.

Tips for Optimal Use

A Type 27 disc has a depressed center with a raised hub. The sunken flange / lock nut attaches to the power tool, and the disc may be used with a random orbital sander or die grinder. Its depressed design helps with right angles and hard-to-reach areas. Some operators appreciate the angle of a Type 27 disc for flat surfaces as well. Users should be careful to follow the recommended operating speeds to ensure optimal performance and safety.

While welds, rust and contaminants are a natural part of metal aging and metal work, they don't have to prevent or impede a lasting luster. The Standard Abrasives™ Type 27 Cleaning Pro Disc helps users who desire a final finish to achieve it.

Quality Standard Abrasives™ Solutions for Industrial Applications

The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. They offer a broad selection of high performance products including coated, bonded, and non-woven abrasive lines.

Brochures, Catalogs & Data Sheets