Scotch-Brite™ Surface Conditioning Belt is a durable belt engineered to perform detail work such as blending, blending corners, cleaning, contour finishing, deburring, deburring edges, fine finishing, flat finishing, setting the grain, stainless steel finishing, and attaining straightline-brushed finishes on a variety of metals.
- Nonwoven, surface conditioning belts clean, blend, deburr and finish
- Reduced loading and heat build-up allow extended operating time and consistent surface conditioning results
- Conformability allows abrasive to stay in contact with complex-shaped parts in robotic processing
- Reinforced backing and nonwoven open web material provide superior flexibility for detail work, over contours and edges
- Removes surface imperfections, grind lines, mill, and other marks
|Width||2 in||50.8 mm|
|Length||34 in||864 mm|
|Maximum Speed||6,500 ft/min|
What is the 3M Scotch-Brite™ Surface Conditioning Belt made of?
The SC-BS belt is made from a non-woven nylon and aluminum oxide abrasive material.
Will this belt work on stainless steel surfaces?
Yes, the SC-BS surface conditioning belts are great for working on stainless steel, along with other materials like carbon steel and nickel alloy.
How long can I expect the belt to last before needing to replace it?
The life of the belt will depend on several factors such as intensity of use and applied pressure. However, you should be able to get many hours of effective use out of each one before replacing it.
Can these belts be used wet or dry during grinding applications?
These surface conditioning belts work well both wet or dry depending upon your application needs.
.What size options do I have when purchasing these Scotch-Brite™ Surface Conditioning Belts?
A.These particular ones come in a width option of 2 inches by a length option of 34 inches per piece in packs Of 10 pieces/ cases however we have different sizes available based upon your requirement.
Scotch-Brite™ Surface Conditioning Belt is a versatile abrasive that is effective in removing coarse grind lines, mill marks, or small burrs left by cutting tools or conventional abrasives. These abrasive belts come in various widths and lengths and are suitable for use on a variety of belt sanding tools for both wood and metal applications.Ideal for Robotic Finishing
Scotch-Brite™ Surface Conditioning Belts are an excellent option for robotic metal finishing due to their wide range of conformability options and high consistency. They can produce a spec-required, aesthetic finish when used in both manual and robotic processing.Choose the Right Belt for You
3M offers a broad selection of belts to fit most industrial belt sanders. Wide belt sanders are used for sanding and finishing large wood panels. Medium-width belts fit onto edge or portable belt sanders for sanding or blending wood pieces such as cabinet doors, and narrow belts are used with file tools in metalworking to access small areas or inside corners.Hard-Working Minerals: Aluminum Oxide and Silicon Carbide
Scotch-Brite™ Surface Conditioning Belts are manufactured with a choice of silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.An Alternative for Wheels and Discs
Belt sanders are used for rapid grinding, sanding, and finishing on a variety of surfaces. Sanding wheels and discs may clog quickly, making them less efficient, depending on the material being worked. Belt sanders continue to sand without clogging because small grooves in the abrasive belt open as they go around the arc of the drive wheel.