Scotch-Brite™ Surface Conditioning Belt is a durable belt engineered to perform detail work such as blending, blending corners, cleaning, contour finishing, deburring, deburring edges, fine finishing, flat finishing, setting the grain, stainless steel finishing, and attaining straightline-brushed finishes on a variety of metals.
- Nonwoven, surface conditioning belts clean, blend, deburr and finish
- Reduced loading and heat build-up allow extended operating time and consistent surface conditioning results
- Conformability allows abrasive to stay in contact with complex-shaped parts in robotic processing
- Reinforced backing and nonwoven open web material provide superior flexibility for detail work, over contours and edges
- Removes surface imperfections, grind lines, mill, and other marks
|Width||3 in||76.2 mm|
|Length||24 in||610 mm|
|Maximum Speed||6,500 ft/min|
What is the dimension of the 3M Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium?
The 3M Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium has a length of 24 inches and a width of 3 inches.
How many pieces are there in one case of the 3M Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium?
There are ten pieces in each case of the 3M Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium.
What kind of surface material can this belt clean or finish?
This surface conditioning belt is designed to clean and finish various types of metals such as carbon steel and stainless steel surfaces. It can also be used on hard plastics and composites.
Can I use this product with water for wet sanding applications?
Yes! The open-web construction allows access to channels that keep fibers cool while removing materials faster than other abrasives. You may use it wet or dry but avoid applying too much pressure.
Is this product durable enough for commercial-grade projects requiring extended run times?
Absolutely! The abrasive mineral stays sharp even after consuming some layers so you won't need to replace it as often as regular aluminum oxide abrasives. Its nylon web backing contributes to its durability during extended use times by cushioning delicate workpieces from heat buildup caused by friction.
Scotch-Brite™ Surface Conditioning Belt is a versatile abrasive that works well to remove coarse grind lines, mill marks, or small burrs left by cutting tools or conventional abrasives. These abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal.Ideal for Robotic Finishing
With a wide range of conformability options and high consistency, long-lasting Scotch-Brite™ industrial abrasives are a great option for robotic metal finishing. Scotch-Brite™ Surface Conditioning Belts can generate a spec-required, aesthetic finish when used in both manual and robotic processing.Choose the Right Belt for You
3M offers a broad selection of belts to fit most any industrial belt sander. Wide belt sanders are used for sanding and finishing large wood panels. Medium-width belts fit onto edge or portable belt sanders for sanding or blending wood pieces such as cabinet doors, and narrow belts are used with file tools in metalworking to access small areas or inside corners.Hard-Working Minerals: Aluminum Oxide and Silicon Carbide
Scotch-Brite™ Surface Conditioning Belts are manufactured with a choice of silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.An Alternative for Wheels and Discs
Belt sanders are used for rapid grinding, sanding and finishing on a variety of surfaces. Depending on the material being worked, sanding wheels and discs may clog, quickly making them less efficient, while belt sanders continue to sand without clogging because small grooves in the abrasive belt open as they go around the arc of the drive wheel.