Scotch-Brite™ Aircraft Cleaning Pad is a lofty textured non-woven web manufactured with a unique non-abrasive polymer. The non-abrasive coating increases the wet friction, enabling the pad to clean more efficiently than nonwoven pads, urethane foam and cellulose sponges.
- Non-abrasive pad cleans and polishes without scratching
- Ideal for cleaning painted, high or low gloss surfaces
- Soft, conformable pad adapts to contours for consistent results
- Works well with commercial cleaners, pressure wash systems, and is MIL Spec compliant
- Suitable for hand use or with 3M pad holders and extension products
|Width||6 in||15.24 cm|
|Length||12 in||30.48 cm|
What are the dimensions of the Scotch-Brite™ Aircraft Cleaning Pad?
The Scotch-Brite™ Aircraft Cleaning Pads have a dimension of 6 inches x 12 inches.
How many pads come in a case?
There are 50 pads that come per case of Scotch-Brite™ Aircraft Cleaning Pad.
Can you tell me more about what this pad is specifically designed for?
Sure! The Scotch-Brite™ Aircraft Cleaning Pad is specially designed to clean painted surfaces on airplanes without removing or damaging decals or other graphics. It's great for cleaning and preparing surfaces prior to painting, too.
Scotch-Brite™ Aircraft Cleaning Pad is a unique cleaning product that is safe to use on aircraft surfaces, gel coated fiberglass, acrylics, and polycarbonate. The pad does not alter or scratch the gloss level of surface or coatings.
The pad has been tested with aircraft cleaning agents complaint with MIL-PRF-86937D and MIL-PRF885570C and is also usable with a variety of other cleaners. It works in conjunction with pressure wash systems and attaches easily to 3M pad holders and extension rods.
The polymer coating is incorporated into non-woven synthetic fibers, creating a cleaning tool that delivers consistent results over its lifetime. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product.