A smooth ride
through rough waters
through rough waters
Welcome Guest
3M™ Scotch-Weld™ Epoxy Adhesive 2214 Non-Metallic Filled, Cream, 6 fl oz Cartridge, 4/case
$75.17 / Each
| SKU | 7000121273 |
|---|---|
| Legacy SKU | 62340129345 |
| UPC | 00021200254963 |
| Product Number | 2214 |
3M™ Scotch-Weld™ Epoxy Adhesive 2214 Non-Metallic Filled contains no aluminum powders and cures to a cream-color (not gray). This adhesive is designed to provide high strength, high temperature resistance and smooth bond lines. It features slightly lower thermal conductivity than other 2214 epoxies, with higher dielectric strength.
- One part, 100% solids, heat curing adhesive
- Pliable paste consistency goes where needed with no sagging
- Contains no aluminum powders and cures cream-colored
- Excellent adhesion to metals at temperatures up to 250ºF (121ºC)
- Flammability testing per UL94 HB
Product Dimensions |
Imperial | Metric |
| Weight | 0.946 LBS |
|---|
Shipping Dimensions |
|
| Weight | 4.85 lb |
|---|---|
| Length | 8.9 in |
| Width | 6.3 in |
| Height | 4.3 in |
| Color | Cream |
|---|
- Pdf Technical Papers_surface prep
- Data Sheet
- Safety Data Sheet
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. 
Pliable Paste Consistency Goes Where Needed with No Sagging
3M™ Scotch-Weld™ Epoxy Adhesive 2214 Non-Metallic Filled is designed for use in applications where high strength bonds are needed in a temperature range of -67°F to 250°F (-53°C to 121°C). It can cure at 248ºF (120ºC). This epoxy adhesive may be applied by spatula, trowel, or flow equipment to meet your individual project requirements. Flammability testing per UL94 HB.
Recommended Applications
Bonding metals
Understanding One-Part Epoxy Adhesives
Epoxy adhesives are part of the class of adhesives called structural adhesives, which include polyurethane, acrylic, cyanoacrylate and other adhesive families. While most epoxies are two-part formulations that undergo a chemical reaction when mixed, there are also one-part epoxy adhesives in which the chemical reaction begins when they are subjected to high temperatures for specified periods. These one-part formulations do not require measuring or mixing and can generally be reworked until heat is applied. They also exhibit higher temperature resistance than two-part epoxy adhesives.
Epoxy adhesive (often referred to as epoxy glue) is widely used in building and home construction; aircraft and automobile manufacturing; bicycle, boat, golf clubs, ski and snowboard assembly as well as a host of home use and other applications. It is used virtually anywhere high-strength bonds are needed along with resistance to environmental conditions. These adhesives are popular for their ease of use, mechanical strength and chemical resistance. Formulations can be created to make epoxy for plastic flexible or epoxy for metal rigid, epoxy resin transparent or opaque, quick setting or slow setting. The versatility with which these adhesives can be formulated helps meet almost any requirement for bonding wood, metal, glass, stone and various plastics. Add to cart
3M™ Scotch-Weld™ Epoxy Adhesive 2214 Non-Metallic Filled is designed for use in applications where high strength bonds are needed in a temperature range of -67°F to 250°F (-53°C to 121°C). It can cure at 248ºF (120ºC). This epoxy adhesive may be applied by spatula, trowel, or flow equipment to meet your individual project requirements. Flammability testing per UL94 HB.
Recommended Applications
Bonding metals
Understanding One-Part Epoxy Adhesives
Epoxy adhesives are part of the class of adhesives called structural adhesives, which include polyurethane, acrylic, cyanoacrylate and other adhesive families. While most epoxies are two-part formulations that undergo a chemical reaction when mixed, there are also one-part epoxy adhesives in which the chemical reaction begins when they are subjected to high temperatures for specified periods. These one-part formulations do not require measuring or mixing and can generally be reworked until heat is applied. They also exhibit higher temperature resistance than two-part epoxy adhesives.
Epoxy adhesive (often referred to as epoxy glue) is widely used in building and home construction; aircraft and automobile manufacturing; bicycle, boat, golf clubs, ski and snowboard assembly as well as a host of home use and other applications. It is used virtually anywhere high-strength bonds are needed along with resistance to environmental conditions. These adhesives are popular for their ease of use, mechanical strength and chemical resistance. Formulations can be created to make epoxy for plastic flexible or epoxy for metal rigid, epoxy resin transparent or opaque, quick setting or slow setting. The versatility with which these adhesives can be formulated helps meet almost any requirement for bonding wood, metal, glass, stone and various plastics. Add to cart
