through rough waters
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315H, Yellow, 54 in x 25 yd, 15 mil, 1 roll per case
$1,684.09 / Roll
| SKU | 7000122466 |
|---|---|
| Legacy SKU | 70002020108 |
| UPC | 00051125748223 |
| Product Number | E1315H |
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315H with easy mount adhesive is designed for mounting flexographic print plates to cylinders or sleeves. This yellow foam mounting tape provides high quality medium soft combination print.
- 0.015 inch (0.38 mm) double coated foam tape has the air release feature with a plate side adhesive technology designed to resist edge lifting on flexographic print plates
- Has a medium soft density foam that is ideal for printing combinations of solids and process with halftone dots
- Yellow foam color indicates the medium soft density foam
- Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
- Has higher plate side adhesion for challenging print conditions that use thick plates or small print sleeves
- Print plates mounted on E1315H will have no air bubbles under the plate due to the air release feature designed into the tape
- Grooves in the adhesive are created by a cross-hatch pattern from the release liner.
- Plate demounts from the double coated cushioned tape without adhesive residue
- Tape also removes cleanly from the sleeve or steel print cylinder
- Flexographic printing, flexographic printers
- Cushioned flexographic plate mounting sticky back foam tape
Product Dimensions |
Imperial | Metric |
| Width | 54 in | 1371.6 mm |
|---|---|---|
| Length | 25 yd | 22.86 m |
Shipping Dimensions |
|
| Weight | 24 lb |
|---|---|
| Length | 55.625 in |
| Width | 8.25 in |
| Height | 9.125 in |
| Color | Yellow |
|---|
PRODUCT FAQ
-
What is 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315H?
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315H is a double coated foam tape that has high adhesion and good holding power suitable for mounting photopolymer plates to printing cylinders or sleeves in flexographic printing.
-
What material is the yellow foam made of?
The yellow foam used in the 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315H is made from polyurethane elastomer foam which provides superior compressibility and deformation recovery properties, making it an ideal choice for cushion mounting applications.
-
Is this product easy to use?
Yes, 3M's adhesive tape products are designed for ease of use. Simply unroll the required length of tape from the roll, stick onto your chosen surface and press down firmly with even pressure across the entire surface area.
-
How much coverage does one roll provide?
One case contains one (1) roll measuring at least 54 inches wide by up to 25 yards long - enough coverage will vary depending on how much you cut per plate job.
-
Q : Can this be used for any type of printing application?
A : While specially engineered it definitely can correctly mount flexo plates onto various surfaces including printer cylinders or sleeves within typical flexographic label production processes; its appliance varies as well after all depended upon customer requirements too
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315H is a yellow foam tape that provides high quality combination print. This is the medium soft tape for combination print. It has the air release feature that allows for bubble free mounting. This tape has excellent resistance to lifting on press allowing for clean plate removal.
Recommended Applications- Mounting photopolymer plates to flexographic printing cylinders and sleeves
- Used in combination, process and solid printing processes
- 3M sticky back tapes are designed for narrow web presses to print tag and labels
3M flexographic plate mounting tapes are highly engineered to provide very tight caliper tolerance to allow printers to use tape from different manufacturing lots and keep tight print registration. The compressible foam will withstand long and high speed print runs.
This cushion tape is manufactured for 15 mil applications. It is constructed with engineered acrylic adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting of photopolymer plates. The adhesive on the non-linered (sleeve/cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting.
On Easy with Reduced Air Entrapment3M air release liners have a crosshatched pattern, unlike other mounting tapes that use a pebbled or flat release liner. The embossed crosshatched pattern imprints unique micro-channels into the easy mount adhesive that allows entrapped air to escape. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting.
Keep the Presses Running and your Customers Coming BackFor decades, 3M products have been at work in printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done.