Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
SKU 7000145572
Legacy SKU 98040055976
UPC 00051115188091
Catalog Number DT100
Product Number DT 100

3M Fire Barrier Putty Sleeve Kits are designed to help prevent the passage of fire and smoke in new or existing cable penetrations through walls or floors. These kits are tested up to 4 hours for fire-rated through penetration systems (in accordance with ASTM E814). No gasket is required with this product and it allows for both new and retrofit data and telecom cable firestop installations.

  • Ready-to-install kit for complete cable or blank firestop installation
  • Tested up to 4 hours for fire-rated through penetration systems in accordance with ASTM E814 (UL 1479)
  • No gasket required to ease installation process
  • Rolled-out lip on sleeve allows for smooth cable entry
  • Brackets and sleeve work in tandem to help prevent slipping during installation
  • Allows for both new and retrofit data and telecom cable firestop installations
  Add to cart
On it's way to you April 8   

Qty

Minimum Order 1 Kit
Order Increment 1 Kit
  Immense Fire Resistance
  Residential & Commercial Buildings
  Fast, Global Shipping
  Industry Low Price
Product Dimensions
Imperial Metric
Width 0 np 0 NP
Length 0 np 0 NP
Diameter 1 in 25 mm
Shipping Dimensions
Weight 1.7 lb
Length 5 in
Width 3.313 in
Height 13.5 in
Color Red

PRODUCT FAQ

  1. What is the 3M™ Fire Barrier Putty Sleeve Kit DT 100, 1 in Round, 1/case used for?

    The kit is designed to protect plastic pipes penetrating through fire-rated walls and floors.

  2. What type of fire rating does the putty sleeve have?

    It has a two-hour fire rating which helps to prevent smoke and flames from spreading in case of a fire.

  3. Is it easy to install?

    Yes, it's extremely easy. Simply apply the putty around the pipe where it penetrates through a wall or floor opening.

  4. Does this product comply with all relevant safety standards?

    Yes. The kit is tested to ASTM E814 (UL1479) and CAN/ULC-S115 standard and meets UL classified system requirements for up to two hours F-rating protection against flame penetration at nominal joint openings.

  5. Is this product environmentally friendly?

    The safe usage temperature range of Fire Barrier Putty ranges between -20°F (-29°C) ~ +125°F (+52°C). And also manufacturer confirms that these products are not contaminated by any prohibited substances like lead-free, silicone free & VOCs limits as described in Restriction on Hazardous Substances (RoHS), Registration Evaluation Authorization restriction Chemicals(REACH).So yes,it can be considered as an eco-friendly product.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Ready to Install and Prepared to Protect

Prevent the passage of fire and smoke with 3M™ Fire Barrier Putty Sleeve Kits. These kits are designed to protect existing cable penetrations through walls or floors. The sleeve can be used as a one-piece sleeve or split/hinged for existing cable installations. These putty sleeve kits have been tested up to 4 hours for fire-rated through penetration systems in accordance with ASTM E814 (UL 1479). The kit is ready-to-install and does not require gaskets. The rolled-out lip on the sleeve facilitates smooth cable entry. The sleeves can be easily installed in openings that are either tight to the sleeve or irregular and can accommodate oversized openings (up to a one-inch larger diameter than the 3M™ Fire Barrier Putty Sleeve diameter).

Recommended Applications

3M™ Fire Barrier Putty Sleeve Kits are suitable for installation in gypsum wallboard and concrete walls or floors. They are ideal for existing through-penetration openings with cables, future cable installations, and new construction through-penetration openings for power and communication cables.

Versatile Kit for an All-in-One Solution

3M™ Fire Barrier Putty Sleeve Kits are ideal for high traffic cable penetrations and designed to be used for both new construction and retrofitting. The blank sleeve (0% cable fill) accommodates future cable installation while the two-piece split/hinged design offers easy retrofit installation on existing cables. The brackets and sleeve work in tandem to help prevent slipping during installation so the sleeve will remain in place.

Each kit comes complete in a box containing a 3M™ Fire Barrier Putty Sleeve (two-part metallic sleeve with set of two-part metallic flanges), 3M™ Fire Barrier Moldable Putty+, sheet metal screws, drywall screws and two installation identification labels. These kits can be used as a one-piece sleeve or the sleeve may be split/ hinged for existing cable installations. A versatile and economical solution, these putty sleeve kits are able to meet application requirements in such a way that help reduce inventory.

Innovative Fire Barrier Solution

Whether used in new construction or renovation projects, 3M™ Fire Barrier Putty Sleeve Kits provide everything you need in one complete kit. An innovative sleeve design delivers both fire and cable protection and helps ensure smooth cable entry and no-slip installations. Rest easy and enjoy the peace of mind that comes from a kit that maintains all the components necessary to meet firestop code for installation of cable and blank applications.

Brochures, Catalogs & Data Sheets
Other Products in this Family

Lead times are estimates and may vary based on our suppliers' product availability.