3M Xtract™ Hookit™ Paper Disc 236U, 5 in P180 C-weight, 50 per inner, 250 per case

$0.84 / Each

SKU	7010029930
Legacy SKU	XA012057692
UPC	00051141555003
Part Number	55500
Product Number	236U

3M™ Hookit™ Clean Sanding Disc 236U features a 3M proprietary multi-hole pattern that evacuates dust better than 5- or 6-hole products — dramatically increasing disc life. The design achieves an ideal balance between the abrasive surface and dust extraction holes to maximize cut and optimize the life of the disc.

Precise multi-hole pattern means excellent dust extraction and eliminates the need to align holes
Open coat and load-resistant coating prevents clogging to optimize cut and product life
3M™ Hookit™ discs are easy to change and reuse, maximizing utility for the life of the disc
Aluminum oxide grains cut faster and last longer than traditional garnet
Strong, C-weight paper backing supports aggressive sanding

Add to cart

Superior Cut Rate

Durable

Custom Fit

Can Use on Many Surfaces

Product Dimensions	Imperial	Metric
Diameter	5 in	127 mm

Shipping Dimensions
Weight	3.496 lb
Length	11.3 in
Width	5.9 in
Height	6.3 in

Color	Gold
Maximum Speed	12,000 rpm
Grit	P180

PRODUCT FAQ

What is 3M Xtract™ Hookit™ Paper Disc 236U?

Thank you for asking! The 3M Xtract™ Hookit™ Paper Disc 236U is a high-quality abrasive paper that's perfect for sanding and finishing tasks.
What are the specifications of this product?

This particular variant of the 3M Xtract™ Hookit™ Paper Disc comes in a pack of fifty, with each disc measuring five inches in diameter. It has a grit rating of P180 and weighs around C-weight. Additionally, it comes packed safely within an inner carton which itself is part of a bigger case containing two hundred fifty such packs.
How effective is the abrasive material used in this product?

The abrasive material used to manufacture these discs has been specifically engineered by professionals at 3M to be highly effective at removing burrs and scratches without damaging your workpiece's surface even when under pressure while delivering consistent results time after time.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

The 3M™ Hookit™ Clean Sanding Disc 236U features the 3M™ Hookit™ attachment system, which allows for fast and easy disc changes. This means that you can use the disc again and again for the extent of the abrasive life. The strong, C-weight paper backing on our 3M™ Hookit™ Clean Sanding Disc 236U supports aggressive sanding and minimizes edge wear.

These clean sanding discs are excellent for blending and finishing on aluminum and carbon steel, as well as woodworking applications for heavy and medium stock removal and finishing on hardwoods, softwoods, and composites. They also work well on primer, paint, sealers, topcoats, fiberglass, and plastics.

Sandpaper discs cut better and last longer when dust isn't loading the cutting surface of the abrasives. Reducing dust is easier than ever with 3M clean sanding discs. An open coat means the abrasive grains have space between them so that dust escapes through the spaces rather than loading the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints, and other materials that would, otherwise, clog the disc and hinder sanding ability.

3M's proprietary multi-hole pattern evacuates dust from the disc at a high rate. This hole design doesn't even require alignment of holes with the disc pad (which is attached to a random orbital sander and sold separately), making disc changes quick and simple. The 3M™ Hookit™ attachment system uses a hook and loop design that makes disc changes fast and easy. All of this adds up to improved productivity and reduced material consumption.