A smooth ride
through rough waters
through rough waters
Welcome Guest
Standard Abrasives™ Silicon Carbide Overlap Disc, 730471, 80, 1-1/2 in x 8-32 x 2 Ply, 100 ea/Case
$1.49 / Each
| SKU | 7010295506 |
|---|---|
| Legacy SKU | 66000239385 |
| UPC | 00051141433608 |
| Part Number | 730471 |
The Standard Abrasives™ Silicon Carbide Overlap Disc compresses when entering a hole or cylinder to provide coverage of inside diameters. Used for push and push/pull applications, it is useful mainly for deburring applications on stainless steel, rubber, plastic and composites. It has a threaded eyelet arbor hole for mandrel attachment.
- Overlapped construction compresses for contact with internal radii, holes, and cylinder walls
- Sets of 2 discs are used for push applications
- Sets of 4 discs are used for push/pull applications
- Stacked discs supply a firm, aggressive cut
- Useful for light to medium deburring, polishing, cleaning, blending and chamfering applications
- Effective on stainless steel, rubber, plastic and composites
- Cloth backing provides added durability to resist tearing and fraying
- Compatible Standard Abrasives™ Mandrels are available separately
Product Dimensions |
Imperial | Metric |
| Diameter | 1-1/2 in | 38.1 mm |
|---|
Shipping Dimensions |
|
| Weight | 1.598 lb |
|---|---|
| Length | 6.375 in |
| Width | 6.375 in |
| Height | 4.688 in |
| Grit | 80 |
|---|
- Pdf Catalogs_standard ab coated bo
- Safety Data Sheet
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. 
Coverage of Internal Diameters
For internal diameters that require increased coverage over a cross pad, the Standard Abrasives™ Silicon Carbide Overlap Disc is a good option. The overlapping construction makes the disc flexible so that the operator can push it into a hole or tube and achieve full contact with internal diameters. Discs with four layers achieve abrasive action in both push and pull directions.
Sharp, Fast Cut and Fine Finish
Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding. While it may have a shorter life than aluminum oxide, it produces a finer finish and should be used where the best possible finish is desired.
Running an Overlap Disc
For the convenience of tool-free disc changes, overlap discs have a threaded eyelet arbor hole that screws onto a mandrel and is secured by hand with an attachment bolt (both available separately). A shorter mandrel allows for a steadier application, while a mandrel with extended reach allows access deeper into pipe interiors. Compatible threaded Standard Abrasives™ Mandrels are available separately with thread sizes of 8-32, 3-48, and 1/4-20. An extended version is available with 8-32 threads.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on their broad offering of high performance products including coated, bonded, and non-woven abrasive lines. Add to cart
For internal diameters that require increased coverage over a cross pad, the Standard Abrasives™ Silicon Carbide Overlap Disc is a good option. The overlapping construction makes the disc flexible so that the operator can push it into a hole or tube and achieve full contact with internal diameters. Discs with four layers achieve abrasive action in both push and pull directions.
Sharp, Fast Cut and Fine Finish
Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding. While it may have a shorter life than aluminum oxide, it produces a finer finish and should be used where the best possible finish is desired.
Running an Overlap Disc
For the convenience of tool-free disc changes, overlap discs have a threaded eyelet arbor hole that screws onto a mandrel and is secured by hand with an attachment bolt (both available separately). A shorter mandrel allows for a steadier application, while a mandrel with extended reach allows access deeper into pipe interiors. Compatible threaded Standard Abrasives™ Mandrels are available separately with thread sizes of 8-32, 3-48, and 1/4-20. An extended version is available with 8-32 threads.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on their broad offering of high performance products including coated, bonded, and non-woven abrasive lines. Add to cart