Scotch-Brite™ Multi-Finishing Wheel is a convolute-constructed wheel that provides cleaning and final finishing for stainless steel, aluminum, brass, copper, and other metals. The combination of mineral grades and soft density make the wheel well suited for final finishing applications where a high degree of conformability and less density are needed.
- Provides uniform grain for final finishing on stainless steel, ferrous, and non-ferrous metals
- Highly conformable for consistent finishing on contoured, curved and other surfaces
- Moderate aggressiveness and lighter density provide controlled wear for consistent results over the life of the wheel
- Convolute construction provides a balanced, smooth running wheel throughout product life
- Open, non-woven web runs cool and lessens impact on heat-sensitive materials
|Diameter||12 in||304.8 mm|
|Maximum Speed||3,000 rpm|
What is the Scotch-Brite™ Multi-Finishing Wheel used for?
The Scotch-Brite™ Multi-Finishing Wheel, MU-WL, 2S Fine, 12 in x 1 in x 5 in, is a versatile finishing wheel that can be used for blending and finishing flat or contoured surfaces on metals.
Is the MU-WL wheel durable and long-lasting?
Yes! The Multi-Finishing Wheel is designed with aluminum oxide abrasives and an open-web construction to resist loading while providing consistent cutting action throughout its life. It also has a dense concentration of course fibers and provides more uniform wear than conventional nylon wheels.
Can I use this wheel dry or wet?
You can use the Scotch-Brite™ Multi-Finishing Wheel wet or dry as per your convenience. If you want to avoid dust from sanding operations, then using it wet will help keep everything under control.
The Scotch-Brite™ Multi-Finishing Wheel is an excellent choice for achieving #3 or #4 finishes on stainless steel and other metals on flat, contoured, and curved surfaces. The wheel is designed with an open-web construction that allows it to run cool and resist loading, reducing the risk of part discoloration and warping while extending the wheel's lifespan. The Multi-Finishing Wheel is available in coarse, medium, and fine grade abrasive.
The Multi-Finishing Wheel uses silicon carbide abrasive, which is a synthetic mineral that is incredibly sharp and commonly used for low-pressure applications such as paint prep. Although it breaks down faster than aluminum oxide, it produces a superior finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results throughout the product's lifespan. The material used in the Multi-Finishing Wheel runs cool and is load-resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.