A smooth ride
through rough waters
through rough waters
Welcome Guest
3M™ Non-Silicone Secondary Release Liner 4935, Clear, 50 in x 180 yd, 3 mil, 1 roll per case
$4,122.42 / Roll
| SKU | 7010334828 |
|---|---|
| Legacy SKU | 70006399383 |
| UPC | 00051131177222 |
| Product Number | 4935 |
3M™ Non-Silicone Secondary Release Liner 4935 is a 3 mil clear polyester film with a non-silicone release coating applied to one side, suitable for applications where silicone release agents can leave residue or interfere with subsequent processes. The 4935 release coating delivers a medium release level. PET film liner construction adds strength for reduced tear-outs and easy converting.
- Excellent for applications requiring non-silicone processes
- 3 mil clear PET film provides high tensile strength and reduces tear-outs
- Non-silicone release coating applied to one side for specific constructions
- Clean-room compatible with a moderate release force
Product Dimensions |
Imperial | Metric |
| Width | 50 in | 1270 mm |
|---|---|---|
| Length | 180 yd | 164.59 m |
Shipping Dimensions |
|
| Weight | 42.0471 lb |
|---|---|
| Length | 55 in |
| Width | 8.5 in |
| Height | 8.5 in |
- Pdf Data Sheets_3m secondary liner
- Data Sheet
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. 
Delivers a Moderate Release Level
For specialty applications where silicone agents can slow down productivity or lessen finished product quality, 3M™ Non-Silicone Secondary Release Liner 4935 is an excellent choice. Instead of silicone release chemistry, this 3.0 mil polyester film liner features a non-silicone, fluoropolymer release coating that delivers a medium release level. This coating is applied to one side of the film to suit secondary and double-liner constructions. High-strength polyester film can help reduce breakage during automated cutting and dispensing processes.
3M™ Non-Silicone Secondary Release Liner 4935 provides a moderate release level. 3M™ Non-Silicone Secondary Release Liner 5053 offers a lower release level, and 3M™ Non-Silicone Secondary Release Liner 5932 offers the tightest release level.
Recommended Applications:
Applications where silicone can leave residue or hamper subsequent processing
Automated die-cutting and dispensing where tear-outs are a concern
Applications requiring medium release level
About 3M™ Non-Silicone Secondary Release Liners
3M secondary liners are available in a variety of designs and materials. 3M provides secondary release liners in polycoated and densified kraft, flatstock, HDPE and clear polyester film for a full range of adhesives and converting processes.
Better Science for Better Adhesives from 3M
Since 1925 when a lab assistant invented masking tape, 3M has been applying science to life – developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each industrial labeling and adhesive products like 3M™ Non-Silicone Secondary Release Liner 4935, to help businesses operate faster, better and more efficiently. Add to cart
For specialty applications where silicone agents can slow down productivity or lessen finished product quality, 3M™ Non-Silicone Secondary Release Liner 4935 is an excellent choice. Instead of silicone release chemistry, this 3.0 mil polyester film liner features a non-silicone, fluoropolymer release coating that delivers a medium release level. This coating is applied to one side of the film to suit secondary and double-liner constructions. High-strength polyester film can help reduce breakage during automated cutting and dispensing processes.
3M™ Non-Silicone Secondary Release Liner 4935 provides a moderate release level. 3M™ Non-Silicone Secondary Release Liner 5053 offers a lower release level, and 3M™ Non-Silicone Secondary Release Liner 5932 offers the tightest release level.
Recommended Applications:
Applications where silicone can leave residue or hamper subsequent processing
Automated die-cutting and dispensing where tear-outs are a concern
Applications requiring medium release level
About 3M™ Non-Silicone Secondary Release Liners
3M secondary liners are available in a variety of designs and materials. 3M provides secondary release liners in polycoated and densified kraft, flatstock, HDPE and clear polyester film for a full range of adhesives and converting processes.
Better Science for Better Adhesives from 3M
Since 1925 when a lab assistant invented masking tape, 3M has been applying science to life – developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each industrial labeling and adhesive products like 3M™ Non-Silicone Secondary Release Liner 4935, to help businesses operate faster, better and more efficiently. Add to cart