Scotch-Brite™ Multi-Finishing Wheel is a convolute-constructed wheel that provides cleaning and final finishing for stainless steel, aluminum, brass, copper, and other metals. The combination of mineral grades and soft density make the wheel well suited for final finishing applications where a high degree of conformability and less density are needed.
- Provides uniform grain for final finishing on stainless steel, ferrous, and non-ferrous metals
- Highly conformable for consistent finishing on contoured, curved and other surfaces
- Moderate aggressiveness and lighter density provide controlled wear for consistent results over the life of the wheel
- Convolute construction provides a balanced, smooth running wheel throughout product life
- Open, non-woven web runs cool and lessens impact on heat-sensitive materials
|Diameter||4 in||101.6 mm|
|Maximum Speed||9,000 rpm|
What is the Scotch-Brite™ Multi-Finishing Wheel used for?
The Scotch-Brite™ Multi-Finishing Wheel is designed to provide uniform finishing on various metals, including aluminum, stainless steel, copper and brass.
Can it be used with power tools?
Yes! It can be utilized with bench motors and straight shaft grinders; don't forget to check the RPM range of your machine!
How long will this wheel last before needing replacement?
That really depends on a number of factors such as how frequently it's being applied or what tasks are being performed. However you should probably replace the unit once its diameter has worn down below 2".
What size is this wheel & what does "MU-WL" mean?
This particular wheel measures 4 inches in diameter by 1 inch in width and bore. The code "MU-WL" refers to nylon impregnated abrasive material bonded together within a fiber matrix.
. Is it safe for metal surfaces?
Absolutely! As opposed to traditional grinding wheels that may remove an excess amount of material from your surface causing larger unwanted burrs in your workpiece, our MU-WL Multi-finishing Wheels use longer-lasting scotch-brite abrasives smooth out surfaces uniformly over time and removes little-to-no base metal allowing you more control over fabrication dimensions without sacrificing durability..
The Scotch-Brite™ Multi-Finishing Wheel is an excellent choice for achieving #3 or #4 finishes on stainless steel and other metals on flat, contoured, and curved surfaces. The wheel is designed with an open-web construction that resists loading and runs cool, reducing the risk of part discoloration and warping while extending the wheel's life. The Multi-Finishing Wheel is available in coarse, medium, and fine grade abrasive.
The Multi-Finishing Wheel uses silicon carbide abrasive, which is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. Although it breaks down faster than aluminum oxide, it produces a superior finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results throughout the product's life. The material used in the Multi-Finishing Wheel runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.