A smooth ride
through rough waters
through rough waters
Welcome Guest
3M™ Scotch-Weld™ Gasket Maker GM18, Red, 300 Gram Cartridge, 10/Case
$63.43 / Each
| SKU | 7010367433 |
|---|---|
| Legacy SKU | 62345433627 |
| UPC | 00048011626604 |
| Product Number | GM18 |
3M™ Scotch-Weld™ High Temperature Gasket Maker GM18 is a red, flexible, one-component anaerobic sealant formulated to replace pre-cut gaskets, O-rings or used as form-in-place gaskets. They cure at room temperature and seal rigid assemblies of any shape or size. They can be used to fill pits, scratches, and gouges in the flange surface without having to grind or skim the mating surfaces.
- Used as form-in-place gaskets
- Eliminates the need for pre-cut gaskets, reducing weight, inventory and cost
- Cure at room temperature and seal rigid assemblies of any shape or size
- Withstands temperatures up to 300ºF (148ºC)
- Does not shrink, crack, sag or run
- For use on rigid flanges and to seal metal assemblies
Product Dimensions |
Imperial | Metric |
| Weight | 1.004 LBS |
|---|
Shipping Dimensions |
|
| Weight | 10.274 lb |
|---|---|
| Length | 10.629 in |
| Width | 4.37 in |
| Height | 10.669 in |
| Color | Red |
|---|
- TIF Product Single Images_3mtm gre
- Data Sheet
- Safety Data Sheet
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. 
Eliminates the Need for Pre-Cut Gaskets
3M™ Scotch-Weld™ High Temperature Gasket Maker GM18 can be applied straight from the tube or by tracing, roll coating, or screen printing to provide an instant low pressure seal, eliminating the need for pre-cut gaskets, reducing weight, inventory and costs. In the absence of oxygen and in the presence of metal, this modified urethane acrylate (in paste form) cures quickly to a polymer that seals, secures, and retains. 3M™ Scotch-Weld™ High Temperature Gasket Maker GM18 withstands temperatures as high as 300ºF (148ºC) and does not shrink, crack, sag or run for use on rigid flanges and to seal metal assemblies.
Recommended Applications
Vehicle repair and maintenance
Gearbox and engine casings
Fuel and water pumps
Auto thermostats
Air and liquid filters
Fluid handling equipment
Heat exchangers
Ball joints
Understanding Anaerobic Adhesives
Anaerobic adhesives are uniquely formulated to cure in the absence of oxygen. The term "anaerobic" means "living without air" and when the oxygen is excluded, a chemical chain reaction begins that causes the adhesive to polymerize. Contact with metal speeds the polymerization process and rapidly accelerates the curing process, forming tough cross-linked plastic that provides aggressive adhesion with effective shear strength.
More commonly referred to as threadlockers, pipe sealants, retaining compounds, and gasket makers, these adhesives are often used to enhance the seal, or holding force, in the threads of joined fastener systems such as nut-and-bolt assemblies. A nut-and-bolt assembly may have as little as 15% metal-to-metal contact and even a small amount of anaerobic adhesive readily fills any air voids between the threads and then hardens to a thermoset plastic. These unique adhesives are easy-to-dispense, cure rapidly, and provide effective torque strength while resisting temperature and vibration and sealing out moisture and gasses to protect against corrosion. Anaerobic adhesives can decrease manufacturing costs, enhance equipment reliability, minimize aftermarket breakdown, and reduce warranty claims. Add to cart
3M™ Scotch-Weld™ High Temperature Gasket Maker GM18 can be applied straight from the tube or by tracing, roll coating, or screen printing to provide an instant low pressure seal, eliminating the need for pre-cut gaskets, reducing weight, inventory and costs. In the absence of oxygen and in the presence of metal, this modified urethane acrylate (in paste form) cures quickly to a polymer that seals, secures, and retains. 3M™ Scotch-Weld™ High Temperature Gasket Maker GM18 withstands temperatures as high as 300ºF (148ºC) and does not shrink, crack, sag or run for use on rigid flanges and to seal metal assemblies.
Recommended Applications
Vehicle repair and maintenance
Gearbox and engine casings
Fuel and water pumps
Auto thermostats
Air and liquid filters
Fluid handling equipment
Heat exchangers
Ball joints
Understanding Anaerobic Adhesives
Anaerobic adhesives are uniquely formulated to cure in the absence of oxygen. The term "anaerobic" means "living without air" and when the oxygen is excluded, a chemical chain reaction begins that causes the adhesive to polymerize. Contact with metal speeds the polymerization process and rapidly accelerates the curing process, forming tough cross-linked plastic that provides aggressive adhesion with effective shear strength.
More commonly referred to as threadlockers, pipe sealants, retaining compounds, and gasket makers, these adhesives are often used to enhance the seal, or holding force, in the threads of joined fastener systems such as nut-and-bolt assemblies. A nut-and-bolt assembly may have as little as 15% metal-to-metal contact and even a small amount of anaerobic adhesive readily fills any air voids between the threads and then hardens to a thermoset plastic. These unique adhesives are easy-to-dispense, cure rapidly, and provide effective torque strength while resisting temperature and vibration and sealing out moisture and gasses to protect against corrosion. Anaerobic adhesives can decrease manufacturing costs, enhance equipment reliability, minimize aftermarket breakdown, and reduce warranty claims. Add to cart
