For application to sides and rear of large trucks, trailers and other vehicles to increase their visibility, especially when the vehicle is turning or crossing roadways
- 3M™ Diamond Grade™ Conspicuity Markings Series 983 is a highly reflective microprismatic lens sheeting
- Highly reflective at wide angles
- Aggressive, pressure-sensitive adhesive
- Easy-to-remove liner
- High brightness, superior angularity
|Width||2 in||50.8 mm|
What are 3M™ Diamond Grade™ Conspicuity Markings?
3M™ Diamond Grade™ Conspicuity Markings are highly reflective tapes made of single layer prismatic construction that reflect light more efficiently than glass bead and other similar products. They come with micro sealant technology to resist weathering, dirt and wear.
What is the Capital Ind Logo?
The Capital Ind logo is a feature on these specific markings as they were designed specifically for Capital Industries to feature their branding.
How long does a roll of 3M™ Diamond Grade™ Conspicuity Markings typically last?
A roll of this type can generally last up to seven years, but heavy use could shorten its lifespan.
Is it easy to install by oneself or would I need professional installations?
With proper surface preparation and application technique in line with given procedures, you should be able to install successfully without the need for an expert installation service provider. However we always advise doing plenty of research ahead of time if you have not worked with these materials before!
Is there anything else notable about the design or functionality that customers should be aware of before making purchase decisions?
The product constructions are optimized for increased reflectivity performance through rain, fog and any other visibility hindrances whilst driving under both wet/ rainy conditions hence increasing road safety using standout luminosity!
The 3M™ Diamond Grade™ Conspicuity Markings 983-32 Red/White, Capital Ind Logo, 2 in x 50 yd is a high-quality and durable reflective tape designed to enhance the visibility and safety of vehicles. This marking tape is specifically engineered to meet the requirements of the Federal Motor Carrier Safety Administration (FMCSA) for trucks and trailers, ensuring compliance with regulations.
Featuring a red and white color combination, this conspicuity marking tape provides excellent contrast and visibility, even in low-light conditions. The diamond-grade prismatic technology used in its construction ensures superior reflectivity, making it highly effective in alerting other drivers to the presence of your vehicle on the road.
With a width of 2 inches and a length of 50 yards, this tape is easy to apply and can be cut to the desired length. Its pressure-sensitive adhesive backing ensures a strong and long-lasting bond to various surfaces, including metal, painted surfaces, and plastic. Whether you need to mark the sides, rear, or other areas of your vehicle, this tape is versatile and can be applied to flat or curved surfaces.
Investing in the 3M™ Diamond Grade™ Conspicuity Markings 983-32 Red/White, Capital Ind Logo, 2 in x 50 yd not only enhances the safety of your vehicle but also helps to reduce the risk of accidents on the road. Trust in 3M's reputation for quality and innovation to provide you with a reliable and effective solution for increasing visibility and ensuring the safety of your fleet.