Scotch-Brite™ Multi-Finishing Wheel is a convolute-constructed wheel that provides cleaning and final finishing for stainless steel, aluminum, brass, copper, and other metals. The combination of mineral grades and soft density make the wheel well suited for final finishing applications where a high degree of conformability and less density are needed.
- Provides uniform grain for final finishing on stainless steel, ferrous, and non-ferrous metals
- Highly conformable for consistent finishing on contoured, curved and other surfaces
- Moderate aggressiveness and lighter density provide controlled wear for consistent results over the life of the wheel
- Convolute construction provides a balanced, smooth running wheel throughout product life
- Open, non-woven web runs cool and lessens impact on heat-sensitive materials
|Diameter||6 in||152.4 mm|
|Maximum Speed||6,000 rpm|
What is the Scotch-Brite Multi-Finishing Wheel?
The Scotch-Brite Multi-Finishing Wheel is a non-woven abrasive wheel that can be used for blending, finishing and polishing of metal surfaces.
What does "2S Coarse" mean?
2S Coarse refers to the grit size of the wheel. In this case, it means that this particular wheel has a coarse level of abrasiveness.
What are the dimensions of this product?
This particular Multi-Finishing Wheel measures 6 inches in diameter by 1 inch thick with a 1-inch center hole.
How many wheels come in each package?
Each case includes three individual wheels.
Can I use this on both stainless steel and aluminum surfaces?
Absolutely! This abrasive wheel is suitable for use on both metals along with a variety of other materials like plastics and composites as well.
The Scotch-Brite™ Multi-Finishing Wheel is an excellent choice for achieving #3 or #4 finishes on stainless steel and other metals on flat, contoured, and curved surfaces. The wheel is designed with an open-web construction that allows it to run cool and resist loading, which reduces the risk of part discoloration and warping while extending the wheel's lifespan. The Multi-Finishing Wheel is available in coarse, medium, and fine grade abrasive.
The Multi-Finishing Wheel uses silicon carbide abrasive, which is a synthetic mineral that is incredibly sharp and commonly used for low-pressure applications such as paint prep. Although it breaks down faster than aluminum oxide, it produces a superior finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results for the life of the product. The material used in the Multi-Finishing Wheel runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.