Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
SKU 7100078152
Legacy SKU XA012057759
UPC 00051141555065
Product Number 236U

3M™ Hookit™ Clean Sanding Disc 236U features a 3M proprietary multi-hole pattern that evacuates dust better than 5- or 6-hole products — dramatically increasing disc life. The design achieves an ideal balance between the abrasive surface and dust extraction holes to maximize cut and optimize the life of the disc.

  • Precise multi-hole pattern means excellent dust extraction and eliminates the need to align holes
  • Open coat and load-resistant coating prevents clogging to optimize cut and product life
  • 3M™ Hookit™ discs are easy to change and reuse, maximizing utility for the life of the disc
  • Aluminum oxide grains cut faster and last longer than traditional garnet
  • Strong, C-weight paper backing supports aggressive sanding
  Add to cart
On it's way to you October 6   


Minimum Order 250 Items
Order Increment 250 Items
  Superior Cut Rate
  Custom Fit
  Can Use on Many Surfaces
Product Dimensions
Imperial Metric
Diameter 6 in 152.4 mm
Shipping Dimensions
Weight 6.544 lb
Length 11.3 in
Width 6.9 in
Height 7.3 in
Color Gold
Maximum Speed 12,000 rpm
Grit P80


  1. What is the 3M Xtract™ Hookit™ Paper Disc used for?

    The 3M Xtract™ Hookit™ Paper Disc 236U, P80 C-weight, removes unwanted substances from metal surfaces such as rust, paint and corrosion.

  2. Is it durable enough to last long?

    Yes! This disc provides consistent performance without sacrificing its durability – making your abrasive job efficient and productive.

  3. How many discs are in a case of this type?

    There are 50 discs per inner box and there are four boxes per outer case which makes the total number of discs contained inside the case at two hundred fifty (250).

  4. . How easy is it to attach or replace these with other discs on my sanding machine?

    . These premium paper abrasives can be attached easily with a convenient hook-and-loop feature while still being tough enough as an abrasive for your heavy-duty abrasion tasks so you spend less time changing out discs on your pneumatic air-powered hand-held surface finishing machines thereby increasing productivity.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

The 3M™ Hookit™ Clean Sanding Disc 236U features the 3M™ Hookit™ attachment system, which allows for fast and easy disc changes. This means that you can use the disc again and again for the extent of the abrasive life. The strong, C-weight paper backing on our 3M™ Hookit™ Clean Sanding Disc 236U supports aggressive sanding and minimizes edge wear.

These clean sanding discs are excellent for blending and finishing on aluminum and carbon steel, as well as woodworking applications for heavy and medium stock removal and finishing on hardwoods, softwoods, and composites. They also work well on primer, paint, sealers, topcoats, fiberglass, and plastics.

Sandpaper discs cut better and last longer when dust isn't loading the cutting surface of the abrasives. Reducing dust is easier than ever with 3M clean sanding discs. An open coat means the abrasive grains have space between them so that dust escapes through the spaces rather than loading the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints, and other materials that would, otherwise, clog the disc and hinder sanding ability.

3M's proprietary multi-hole pattern evacuates dust from the disc at a high rate. This hole design doesn't even require alignment of holes with the disc pad (which is attached to a random orbital sander and sold separately), making disc changes quick and simple. The 3M™ Hookit™ attachment system uses a hook and loop design that makes disc changes fast and easy. All of this adds up to improved productivity and reduced material consumption.

Brochures, Catalogs & Data Sheets
Other Products in this Family

Lead times are estimates and may vary based on our suppliers' product availability.