3M™ Hookit™ Clean Sanding Disc 236U features a 3M proprietary multi-hole pattern that evacuates dust better than 5- or 6-hole products — dramatically increasing disc life. The design achieves an ideal balance between the abrasive surface and dust extraction holes to maximize cut and optimize the life of the disc.
- Precise multi-hole pattern means excellent dust extraction and eliminates the need to align holes
- Open coat and load-resistant coating prevents clogging to optimize cut and product life
- 3M™ Hookit™ discs are easy to change and reuse, maximizing utility for the life of the disc
- Aluminum oxide grains cut faster and last longer than traditional garnet
- Strong, C-weight paper backing supports aggressive sanding
|Diameter||6 in||152.4 mm|
|Maximum Speed||12,000 rpm|
What sizes are available for the 3M Xtract™ Hookit™ Paper Disc?
The 3M Xtract™ Hookit™ Paper Disc comes in various diameters, including six inches.
Can you explain what is meant by "P100 C-weight"?
P100 refers to the grade of abrasive used on the disc, while C-weight specifies the thickness and stiffness of the paper backing. In other words, it determines how flexible or stiff the disc is.
How many discs come in each case?
A total of 250 discs are included in every case ordered.
What type of tool should I use with this product?
These discs are designed specifically to be used with hand sanding tools that utilize a hook-and-loop attachment system like our Hookit pads.
Is this product suitable for both wet and dry conditions?
While these discs can perform well under light moisture exposure during use, they're primarily intended for dry sanding applications.
The 3M™ Hookit™ Clean Sanding Disc 236U features the 3M™ Hookit™ attachment system, which allows for fast and easy disc changes. This means that you can use the disc again and again for the extent of the abrasive life. The strong, C-weight paper backing on our 3M™ Hookit™ Clean Sanding Disc 236U supports aggressive sanding and minimizes edge wear.
These clean sanding discs are excellent for blending and finishing on aluminum and carbon steel, as well as woodworking applications for heavy and medium stock removal and finishing on hardwoods, softwoods, and composites. They also work well on primer, paint, sealers, topcoats, fiberglass, and plastics.
Sandpaper discs cut better and last longer when dust isn't loading the cutting surface of the abrasives. Reducing dust is easier than ever with 3M clean sanding discs. An open coat means the abrasive grains have space between them so that dust escapes through the spaces rather than loading the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints, and other materials that would, otherwise, clog the disc and hinder sanding ability.
3M's proprietary multi-hole pattern evacuates dust from the disc at a high rate. This hole design doesn't even require alignment of holes with the disc pad (which is attached to a random orbital sander and sold separately), making disc changes quick and simple. The 3M™ Hookit™ attachment system uses a hook and loop design that makes disc changes fast and easy. All of this adds up to improved productivity and reduced material consumption.