Scotch-Brite™ Multi-Finishing Wheel is a convolute-constructed wheel that provides cleaning and final finishing for stainless steel, aluminum, brass, copper, and other metals. The combination of mineral grades and soft density make the wheel well suited for final finishing applications where a high degree of conformability and less density are needed.
- Provides uniform grain for final finishing on stainless steel, ferrous, and non-ferrous metals
- Highly conformable for consistent finishing on contoured, curved and other surfaces
- Moderate aggressiveness and lighter density provide controlled wear for consistent results over the life of the wheel
- Convolute construction provides a balanced, smooth running wheel throughout product life
- Open, non-woven web runs cool and lessens impact on heat-sensitive materials
|Diameter||12 in||304.8 mm|
|Maximum Speed||3,000 rpm|
What is the Scotch-Brite™ Multi-Finishing Wheel MU-WL used for?
The Scotch-Brite™ Multi-Finishing Wheel MU-WL, 2S Fine, 12 in x 2 in x 5 in, is a non-woven abrasive wheel that can be used to finish and polish metal surfaces.
How long does the Scotch-Brite™ Multi-Finishing Wheel last?
The lifespan of the Scotch-Brite™ Multi-Finishing Wheel depends on usage and workload. However, it provides a consistent finish throughout its wear life due to its uniform construction.
Can I use this wheel on my handheld grinder?
Yes! The multi-finishing wheels are intended to be put onto bench motors or hand-held grinders with an arbor attachment (3M Arbor Attachment #450), so you should have no problem using it as such.
Which industries commonly use these wheels?
A wide range of industries benefit from multi-finishing technology on their robotic weld cells or manual machines - including automotive/applied vehicles manufacturers and users; aerospace and military customers; agricultural machinery producers/users; heavy-duty vehicle/construction equipment OEMs or repair companies.
The Scotch-Brite™ Multi-Finishing Wheel is an excellent choice for achieving #3 or #4 finishes on stainless steel and other metals on flat, contoured, and curved surfaces. The wheel is designed with an open-web construction that resists loading and runs cool, reducing the risk of part discoloration and warping while extending the wheel's life. The Multi-Finishing Wheel is available in coarse, medium, and fine grade abrasive.
The Multi-Finishing Wheel uses silicon carbide abrasive, which is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. Although it breaks down faster than aluminum oxide, it produces a superior finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results throughout the product's life. The material used in the Multi-Finishing Wheel runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.