3M™ Stikit™ Film Disc Roll 375L, P320 3MIL, 6 in x NH, Die 600Z, 100 Discs/Roll, 4 Rolls/Case

$68.30 / Roll

SKU	7100106550
Legacy SKU	60440326290
UPC	00051115668111
Product Number	375L

3M Stikit Film Disc Roll 375L discs feature a premium aluminum oxide, load resistant, pressure sensitive abrasive product constructed on a durable film backing. This range of versatile discs are designed and configured to achieve a uniform, fine finish on metal, wood, composites or paint.

Durable film backing and premium mineral extend abrasive life
Load-resistant coating helps prevent dust and debris from clogging the disc
3M™ Stikit™ adhesive makes changing discs fast and efficient
Convenient rolls eliminate the need to remove disc liners from individual discs
Optimized design delivers uniform, consistent results on metal, wood, composites and painted substrates

Add to cart

High-Quality Surface Finishes

Reduces Abrasive Costs

Long Lasting Performance

Fantastic Price

Product Dimensions	Imperial	Metric
Weight	1.447 lbs
Width	9-1/2 in
Length	11 in
Height	7 in
Diameter	6 in	152.4 mm
Center Hole Diameter	0 NP	0.0 NP

Shipping Dimensions
Weight	6.01 lb
Length	13 in
Width	6.6 in
Height	3.7 in

Color	Reddish Brown
Maximum Speed	10,000 rpm

PRODUCT FAQ

What is the 3M™ Stikit™ Film Disc Roll 375L?

The 3M™ Stikit™ Film Disc Roll 375L is an adhesive-backed abrasive disc roll.
What grit size is it?

This particular roll has a P320 grit size, which means it's best for smoothing out and refining surfaces before painting or applying coatings.
How big are the discs?

The discs in this roll are 6 inches in diameter and do not have a center hole (NH).
Can you tell me more about its Die number?

Yes! The "Die" refers to the specific cutting die that was used to create these discs. In this case, it's Die number 600Z.
How many discs come in one roll and how many rolls are in each case?

: Each roll contains 100 abrasive discs while there four of such rolls included within one case by manufacturer default but may be sold individually by respective dealer(s) too.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Maximum Versatility

3M™ Stikit™ Film Disc Roll 375L discs offer a wide range of coarse, medium, and fine grades that are effective for finishing, defect repair and leveling, orbital sanding, AOEM finish prep/repair, and paint/lacquer sanding. The premium aluminum oxide mineral used in these discs makes them tough and durable, with self-fracturing properties that expose fresh cutting edges, extending the performance life of the disc. This mineral is widely used in grinding applications in addition to sanding and finishing applications, due to its fast cut-rate, hardness, and strength. It is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.

An open coat construction means the abrasive grains are loosely distributed, allowing sanding debris to collect in the spaces rather than loading the cutting edge of the grains. This feature has the added advantage of producing a more aggressive cut.

Durability

The sturdy film backing provides the durability needed in high-production environments and offers excellent resistance to edge tearing. It delivers a consistent, uniform finish on virtually any substrate. The 375L discs are effective on primers, gel coats and fiberglass, softwoods, metal, plastic, carbon steel, solid surface, hardwoods, and topcoats.

Easy To Use

The convenient Stikit™ discs are ideal for high volume, quick change operations. They are easy to attach and remove, leaving a clean surface for the next disc. 3M™ Stikit™ Film Disc Roll 375L comes ready to use with a pressure-sensitive adhesive coating on the back that mounts on a 3M™ Stikit™ Disc Pad (sold separately) on a random orbital sander. Pressure-sensitive adhesive (PSA) discs offer a high-strength adhesive attachment system, making them a good choice for high heat and severe disc sanding applications.