Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
SKU 7100158715
Legacy SKU 60455090690
UPC 00051131265783
Part Number 26578

The 3M™ Accuspray™ ONE Spray Gun for 3M™ PPS™ Series 2.0 combines the simplicity and easy maintenance of our Accuspray™ spray gun with the material-saving, rapid clean-up convenience of PPS™ Series 2.0, our next generation, highest performing disposable spray cup system. Replaceable atomizing heads afford the performance of a new gun, on demand and at a fraction of the cost.

  • Features Accuspray™ ONE Spray Gun - ONE gun meets all of your spraying needs
  • Includes five (5) replaceable atomizing heads in 2.0 mm (red), 1.8 mm (clear), 1.4 mm (orange), 1.3 mm (green) and 1.2 mm (blue) for spraying of primer, sealer, base and clear coat
  • Fast, simple head replacement affords the performance of a brand new spray gun on demand
  • Atomizing heads can be used on any Accuspray™ replaceable atomizing head spray gun
  Add to cart
On it's way to you October 3   


Minimum Order 4 Kits
Order Increment 4 Kits
  Superior Spray
  Long Lasting Performance
  Fast, Global Shipping
  Industry Low Price
Product Dimensions
Imperial Metric
Weight 1.627 LBS
Shipping Dimensions
Weight 7.1 lb
Length 11.25 in
Width 8.75 in
Height 12.5 in


  1. What is the 3M™ Accuspray™ ONE Pro Spray Gun Kit for PPS™ Series 2.0 used for?

    The 3M™ Accuspray™ ONE Pro Spray Gun Kit is specifically designed to work with the PPS™ disposable paint cup system, which saves time and material waste during cleanup.

  2. Can I use different coatings with this spray gun kit?

    Yes! The kit includes interchangeable atomizing heads that allow you to select between a range of air caps and fluid tips appropriate for applying various materials.

  3. How does using this product benefit me compared to traditional spray guns?

    With its accuracy, efficiency, and ability to reduce overspray by up to 70%, our Accuspray ONE system can help improve productivity in your workflow while also reducing material costs over time.

  4. Is there anything else I need before I get started spraying with this kit?

    You'll just need an air compressor capable of providing at least six cfm (cubic feet per minute) at 23 psi (pounds per square inch), as well as any additional safety equipment required by your job site or company policy.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
ONE System for Every Spraying Need

The 3M™ Accuspray™ ONE Spray Gun for 3M™ PPS™ Series 2.0 is a versatile and efficient system that offers convenience and ease of use. The lightweight, composite spray gun body is designed to simplify the complexity of traditional spray guns. It has been engineered for enhanced durability in automotive and industrial environments. The spray gun uses replaceable, see-through atomizing heads that can be reused 5-10 times and then easily replaced. This provides the performance of a brand new spray gun, on demand and at a fraction of the price.

Replaceable Atomizing Heads for the 3M™ Accuspray™ ONE Spray Gun for 3M™ PPS™ Series 2.0

3M™ Accuspray™ Atomizing Heads for 3M™ PPS™ Series 2.0 are designed to deliver the ideal atomization to a wide range of fluids and coatings applied with Accuspray™ ONE Spray Guns. Atomizing heads are available in five sizes: 2.0 mm (red), 1.8 mm (clear), 1.4 mm (orange), 1.3 mm (green) and 1.2 mm (blue). For sealers, basecoats and topcoats, 3M recommends 1.3 mm or 1.4 mm atomizing heads. Choose the 1.8 mm size for higher-viscosity materials such as primer, and the 2.0 mm size for heavy-duty applications using fluids like gel coats, adhesives, undercoats or industrial coatings. Always refer to your paint company’s recommendations.

Fast, easy controls for fan diameter, fluid and air pressure on the Accuspray™ ONE gun allow for quick adjustment across jobs from spot repairs to full panel coverage requiring up to 12” vertical or horizontal spray patterns. Along with the distinctive color, the fluid tip size is presented clearly on each atomizing head for fast, accurate selection. Atomizing heads are see-through to make it easy for technicians to determine that the head is properly cleaned.

All atomizing heads work with the PPS™ Series 2.0 Spray Cup System – a system of reusable paint cups and disposable lids and liners, so you can be done with cleaning paint cups forever. ONE gun – ONE system for a complete range of applications.

Brochures, Catalogs & Data Sheets
  • Pdf   Instructions_pn26578 pn26580 m