through rough waters
Scotch-Brite™ Surface Conditioning Scrim Backed Belt, SC-BS, A/O Very Fine, 1/2 in x 18 in, 45 ea/Case
$5.91 / Each
| SKU | 7100169919 |
|---|---|
| Legacy SKU | 61500401320 |
| UPC | 00638060054093 |
| Product Number | SC-BS |
Scotch-Brite Surface Conditioning Belt is a durable belt engineered to perform detail work such as blending, blending corners, cleaning, contour finishing, deburring, deburring edges, fine finishing, flat finishing, setting the grain, stainless steel finishing, and attaining straightline-brushed finishes on a variety of metals.
- Nonwoven, surface conditioning belts clean, blend, deburr and finish
- Reduced loading and heat build-up allow extended operating time and consistent surface conditioning results
- Conformability allows abrasive to stay in contact with complex-shaped parts in robotic processing
- Reinforced backing and nonwoven open web material provide superior flexibility for detail work, over contours and edges
- Removes surface imperfections, grind lines, mill, and other marks
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null |
Shipping Dimensions |
|
| Weight | 1.61511 lb |
|---|---|
| Length | 7.08661 in |
| Width | 7.08661 in |
| Height | 25.7874 in |
PRODUCT FAQ
-
What is the size of the 3M Scotch-Brite™ Surface Conditioning Belt, 1/2 in x 18 in, A VFN, 45 ea/Case?
The size of the belt is half an inch by eighteen inches. Each case contains forty-five belts.
-
What does "VFN" mean for this belt?
"VFN" stands for "very fine grade non-woven." This indicates that the abrasive surface has a very fine grit and is soft. This makes it ideal for finishes and helping clean off light burrs or small welds.
-
Q: Is this product restricted to certain customers?
Yes, it is marked as a restricted item which means there may be limitations on who can purchase it. Further details can be found regarding restrictions and how to acquire them on our website.
-
Q: What materials work well with your conditioning belt compared to other abrasives?
Our conditioning belts show comparable results at smoothing edges with metals as well as plastics or even composite surfaces such as carbon fiber reinforced composites due to its non-woven nature which shows less wear than traditional sanding/grinding belts.”
Scotch-Brite™ Surface Conditioning Belt is a versatile abrasive that works well to remove coarse grind lines, mill marks, or small burrs left by cutting tools or conventional abrasives. These abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal.
Ideal for Robotic FinishingWith a wide range of conformability options and high consistency, long-lasting Scotch-Brite™ industrial abrasives are a great option for robotic metal finishing. Scotch-Brite™ Surface Conditioning Belts can generate a spec-required, aesthetic finish when used in both manual and robotic processing.
Choose the Right Belt for You3M offers a broad selection of belts to fit most any industrial belt sander. Wide belt sanders are used for sanding and finishing large wood panels. Medium-width belts fit onto edge or portable belt sanders for sanding or blending wood pieces such as cabinet doors, and narrow belts are used with file tools in metalworking to access small areas or inside corners.
Hard-Working Minerals: Aluminum Oxide and Silicon CarbideScotch-Brite™ Surface Conditioning Belts are manufactured with a choice of silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
An Alternative for Wheels and DiscsBelt sanders are used for rapid grinding, sanding and finishing on a variety of surfaces. Depending on the material being worked, sanding wheels and discs may clog, quickly making them less efficient, while belt sanders continue to sand without clogging because small grooves in the abrasive belt open as they go around the arc of the drive wheel.
