3M™ Cloth Cone 777F, 2 in x 5/8 in x 5/16 in, P100 YF-weight, 200 ea/Case

$4.21 / Each

SKU	7100179517
Legacy SKU	60440350852
UPC	00638060056622
Product Number	777F

3M Cloth Cone 777F reaches into corners, inside surfaces and tight spaces to refine welds, remove machine tool marks, and polish. Built with 3M Ceramic Abrasive Grain on a water resistant polyester cloth backing, it can be run wet or dry. A resin bond is heat resistant and a grinding aid helps to run cool, especially on heat sensitive metals like stainless steel and nickel alloys.

Ceramic/aluminum oxide blend self-sharpens with use and cuts with exceptional efficiency
Tough YF-weight, polyester cloth backing is water resistant for wet applications
Heat-resistant resin bond helps run cool and smooth
Cone shape reaches into tight, hard-to-reach spaces
Grinding aid enhances performance on heat-sensitive alloys such as stainless steel, nickel alloys, and titanium

Add to cart

For Multi-Purpose Applications

Durable

Global Shipping

Industry Low Price

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null
Diameter	5/8 in	15.875 mm

Shipping Dimensions
Weight	2.426 lb
Length	6.83976 in
Width	6.75984 in
Height	5.82992 in

Color	Orange

PRODUCT FAQ

What is the 3M™ Cloth Cone 777F made of?

The 3M™ Cloth Cone 777F is a sanding cone that's made out of high-quality YF-weight cloth material, which makes it ideal for grinding and blending metals.
What grit is the P100 on the 3M™ Cloth Cone 777F?

The P100 on this particular product means that it has a fine grade abrasive, making it perfect for smoothing and finishing surfaces.
How many pieces are included in each case of the 3M™ Cloth Cone 777F?

There are a total of two hundred (200) pieces/packs included in every case you purchase.
Is there any special maintenance process required after using these cones?

Unused or mildly used abrasives can be cleaned so as to remove dust, fillers including other particles picked up from prior work. Any bonding material remaining on an overly worn disc can be scrubbed off with an abrasive pad under running water without fear of damaging the underlying backing due to proprietary resin systems enabling securing particle distribution.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Long Life. Fast Cutting. Cool Running.

3M™ Cloth Cone 777F is one of the best cloth-backed abrasives for stainless steels, aluminum, and carbon steel. It is designed to be used with die grinders and is engineered with high-performance ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.

Tackle Tight Corners

This specialty abrasive is a valuable tool for reaching into corners where larger diameter tools cannot work. It is effective for flash removal, as well as polishing or removing machine tool marks and edge breaking.

Cloth cones mount onto a compatible mandrel (sold separately) that attaches to a die grinder or power drill. The center hole diameter of the cone must be equal to the diameter of the mandrel pilot inserted into the cone.

Best for Heat-Sensitive Metals

Ideally suited for heat-sensitive metals like stainless steel, aluminum, and nickel alloys, 3M™ Cloth Cone 777F combines all the right features to grind cooler with an efficient and faster cut.