3M™ Wind Protection Tapes have excellent UV resistance and can be used to help protect wind turbine blade surfaces from expensive-to-repair and power-robbing damage caused by minor impacts and erosion from rain, sleet, sand, dirt, or other debris.
Rotating at speeds of up to 200 MPH (320 kph), wind turbine blades consistently encounter an array of environmental factors – including rain, sand, hail, and salt spray – which can cause significant damage that is both expensive to repair and reduces the blades
- Constructed from a tough, abrasion and puncture-resistant polyurethane elastomer
- Protects the leading edge of wind turbine blades from erosion damage
- Available in clear or light gray colors for OEM or field applications
|Width||6 in||152 mm|
|Length||36.09 yd||33 m|
For industrial/occupational use only. Not for consumer sale or use.3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.