Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
US Spain
SKU 7000000433
Legacy SKU 60440236689
UPC 00051141283661
Part Number 28366

3M™ File Belt Sander is ideally suited for a variety of metalworking applications. Grind and blend and finish hard-to-reach areas with power and efficiency.

  • Great for deburring, cleaning, blending and finishing in tight or hard-to-reach areas
  • Balanced weight distribution and 3M™ Gripping Material for improved ergonomics and reduced wrist strain
  • 360 degree rotatable housing and handle for the ultimate in versatility
  • Attached belt cover won’t fall off during belt changes
  • Optimized belt speed for 3M™ Abrasive Belts and Scotch-Brite™ Belts
Estimated date of shipment April 7  


Minimum Order 1 Case
Order Increment 1 Case
Product Dimensions
Imperial Metric
Width 7.19 in 18.26 cm
Length 16.57 in 42.09 cm
Height 3.27 in 8.3 cm
Shipping Dimensions
Weight 6.91 lb
Length 16.57 in
Width 7.185 in
Height 3.268 in
Maximum Speed 22,000 rpm
Brochures, Catalogs & Data Sheets
  • Pdf   Catalogs_3m power tools and ac
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
A Lightweight Hand-Held Sander
3M™ File Belt Sander is a lightweight hand-held sander with an arm attachment that extends from the handle, enabling the operator to maneuver and manipulate the abrasive belt, turning and rotating as necessary — up to 360 degrees — to blend hard-to-reach areas. The weight is balanced throughout the handle and features 3M™ Gripping Material to give operators even greater control. This air-powered tool operates at .6 HP (447W) horsepower, reducing operator fatigue and overall project time.

3M™ File Belt Sander was engineered to be used with 3M™ Abrasive Belts and Scotch-Brite Belts. Attachment arms vary, with a standard arm, a variety of arms designed for different applications, as well as arms designed for curves and corners. Operators should consider project needs and requirements when choosing attachments. The 3M™ File Belt Sander helps operators target the surface and cleanly finish, polish, blend and deburr a variety of metal substrates.   Add to cart