Scotch-Brite™ EXL Deburring Wheel features a hard, dense consistency that quickly deburrs, finishes, and polishes all types of metals, composites, glass and leaves a smooth, clean surface. Its conformable characteristic makes the wheel ideal for deburring stamped or laser cut parts, or for finishing after belt sanding.
- Solid, dense, and conformable wheel produces a professional finish the first time, without undercutting, gouging, or distorting the workpiece
- Effective for all types of metals, composites, and glass, allowing one wheel to perform more tasks
- Conformability allows abrasive to stay in contact with complex-shaped parts in robotic processing
- Convolute construction keeps the wheel running smooth, producing a consistent, superior finish
- Unique resin system minimizes smearing, reducing time spent cleaning surfaces
- Minimizes heat build up to reduce risk of discoloration and warping on heat-sensitive substrates
|Diameter||8 in||203.2 mm|
|Maximum Speed||4,500 rpm|
What type of material is the Scotch-Brite™ EXL Deburring Wheel made of?
The deburring wheel is made using tough, durable and non-woven 3M ceramic abrasive grain.
Can I use the XL-WL deburring wheel to remove rust from metal surfaces?
Yes, you can! This particular Fine (9S) grade wheel works particularly well for removing burrs and cleaning up mild rust on metals.
How many replacement wheels are included in each case of the XL-WL deburring wheel?
Each case includes three (3) units of 8 inch x 1 inch x 3 inch fine grade (9S) replacement deburring wheels that fit any standard bench grind. But should you need more or less units, we'll get you covered with your specific requirements.
Runs Cool, Minimizes Smearing
The Scotch-Brite™ EXL Deburring Wheel is designed to create a clean surface without smearing, reducing the need for additional clean up and preparation. The wheel's convolute construction and clean, uniform wear keep it running smoothly and help the operator attain a professional finish while minimizing the pressure required on the workpiece. The nonwoven material of the Scotch-Brite™ runs cool and provides the EXL Deburring Wheel with uniform wear, keeping fresh abrasives continuously exposed, making it a superior choice on heat-sensitive substrates. The toughness of the wheel extends its service life.
Ideal for Robotic Deburring
Scotch-Brite™ industrial abrasives are a great option for robotic deburring, with a wide range of conformability options and high consistency. The Scotch-Brite™ EXL Deburring Wheel quickly removes burrs and sharp edges in end-of-arm tooling operations, delivering consistent performance through the full life of the abrasive.
Available in Your Choice of Mineral
The Scotch-Brite™ EXL Deburring Wheel is available with silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
The Many Benefits of Open Web Abrasives
Scotch-Brite™ offers a unique surface conditioning product with abrasives incorporated into nonwoven nylon fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the nylon fibers.