3M™ Silane Glass Treatment AP115 is an IPA based silane glass treatment that is used in conjunction with 3M™ VHB™ Tape to promote adhesion. It is easy to apply using the 4 fl. oz. spray bottle and is also available in a 1 gallon bulk bottle. It is clear in color.
- Promotes adhesion of 3M™ VHB™ Tapes to uncoated glass surfaces
- Creates a hydrophobic surface on uncoated glass to protect the 3M™ VHB™ Tape bondline
- Available in 4 fl. oz spray bottle or 1 gallon bulk bottle
- Durable and easy to apply
- Clear in color
|Width||6 in||15.24 cm|
|Length||6 in||15.24 cm|
|Height||11-3/4 in||29.85 cm|
What is 3M™ Silane Glass Treatment AP115?
3M™ Silane Glass Treatment AP115 is a clear liquid that can be applied to glass surfaces. It helps improve the adhesion of paints, coatings, and sealants.
How does it work?
When applied to the glass surface, the silane molecules in the treatment react with moisture present on the surface to form chemical bonds. These bonds are responsible for increasing adhesion.
Can it be used on all kinds of glass surfaces?
Yes, this product can be used on all types of glasses like mirrors, windows and even other silica-based materials like ceramics or quartz.
Is it easy to apply?
Yes! This solution can either be sprayed or wiped onto pre-cleaned substrate surfaces then allowed to dry naturally at room temperature
Are there any safety concerns I should know about before I use Silane Glass Treatment AP115?
: Like most chemicals please follow proper safety protocols when handling. Review our Safety Data Sheet (SDS) provided here online by clicking "Safety data sheet" Link below.Product Information
3M™ Silane Glass Treatment AP115 is a solvent mixture of isopropyl alcohol and water that is used to increase adhesion of 3M™ VHB™ Tapes to uncoated glass surfaces. Glass surfaces are water loving in nature, which can cause issues in humid or wet environments when attempting to create a strong, long-lasting adhesive bond. Moisture can undercut the tape bondline and interfere with normal adhesion forces. 3M™ Silane Glass Treatment AP115 creates a hydrophobic surface that protects the 3M™ VHB™ Tape and bonds in even the most moist environments. Easy to apply and clear in color
Glass treatment in wet or humid enviroments
Moisten a clean, soft absorbent, lint-free cloth with the silane solution (or spray solution onto surface) and wipe the area to be bonded in one direction. Immediately follow with a dry lint-free cloth (two-cloth method). A thin "mono-layer" of the silane solution gives the best results.
The glass should be completely dry with no film residue visible.* Under normal room temperature conditions it is best to wait 1 to 2 minutes before applying the tape so that any residual moisture can evaporate.
Apply 3M™ VHB™ Tape within 15 minutes after treating the surface to minimize the risk of recontamination of the surface.
Brochures, Catalogs & Data Sheets
- Pdf Data Sheets_silane glass treat
- Data Sheet
- Safety Data Sheet