Welcome Guest
SKU | 7000001579 |
---|---|
Legacy SKU | 70016047824 |
UPC | 00021200462016 |
Product Number | 94 |
3M™ Tape Primer 94 can be used to improve the overall adhesion of tape, film and vinyl graphics to polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces.
- Promotes adhesion to polyethylene, polypropylene, ABS, PET/PBT blends and other on difficult to stick to substrates
- Commonly used for increasing adhesion of film and vinyl graphics in automotive detailing
- Can be applied with brush or swab for small areas and a pressurized flow gun for larger areas
- Dries to a clear finish
- Cleans up with isopropyl alcohol
Immense Durability
Superior Bond Strength
Global Shipping
Industry Low Price
Product Dimensions |
Imperial | Metric |
Width | 12 in | 30.48 cm |
---|---|---|
Length | 12 in | 30.48 cm |
Height | 13.3 in | 33.782 cm |
Shipping Dimensions |
|
Weight | 38 lb |
---|---|
Length | 12 in |
Width | 12 in |
Height | 13.3 in |
PRODUCT FAQ
-
What is 3M™ Tape Primer 94?
3M™ Tape Primer 94 is a liquid that helps promote adhesion of tape to surfaces.
-
Is the primer light yellow in color?
Yes, the 3M™ Tape Primer 94 comes in a light yellow color.
-
How much primer will I get with this product?
The drum (pail) contains approximately five gallons of primer.
-
What surfaces can I use this adhesive on?
The adhesive can be used on plastics, metal, rubber and painted or bare aluminum.
-
How long does it take for the primer to dry before applying tape?
The timing depends upon environmental factors such as temperature and humidity level so It's better when you leave it for at least five minutes before applying tape on it.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Dries in Minutes for Efficient Use
Make sure your surface is clean and dry before applying a thin, uniform coat of 3M™ Tape Primer 94. The primed surface must remain free from contaminants prior to applying the tape. It's important to use the minimum amount of product necessary as over applying can cause sub-optimal results. Allow the primer to dry completely, which is usually accomplished in 5 minutes at room temperature, before applying tape. Special note: porous surfaces may require 2 applications for uniform coverage and good adhesion. Allow your first application of primer to dry before applying a second coat.
Recommended Applications
Promote adhesion of 3M™ VHB™ Tape
For use on many plastic, rubber, painted and bare metal substrates
Application Tips
3M™ Tape Primer 94 may be applied with a brush, swab, pressurized flow gun, knurled roller or similar type of equipment and can be removed with isopropyl alcohol. Vigorous scrubbing may be required.
Make sure your surface is clean and dry before applying a thin, uniform coat of 3M™ Tape Primer 94. The primed surface must remain free from contaminants prior to applying the tape. It's important to use the minimum amount of product necessary as over applying can cause sub-optimal results. Allow the primer to dry completely, which is usually accomplished in 5 minutes at room temperature, before applying tape. Special note: porous surfaces may require 2 applications for uniform coverage and good adhesion. Allow your first application of primer to dry before applying a second coat.
Recommended Applications
Promote adhesion of 3M™ VHB™ Tape
For use on many plastic, rubber, painted and bare metal substrates
Application Tips
3M™ Tape Primer 94 may be applied with a brush, swab, pressurized flow gun, knurled roller or similar type of equipment and can be removed with isopropyl alcohol. Vigorous scrubbing may be required.
- Pdf Data Sheets_3mtm tape primer 9
- Data Sheet
- Safety Data Sheet