3M™ Flap Disc 747D, 60, T27, 4-1/2 in x 7/8 in, 10 ea/Case

$9.98 / Each

SKU	7000028344
Legacy SKU	60650034683
UPC	00051111496152
Product Number	747D

3M™ Flap Disc 747D is a ceramic grain abrasive flap disc with a durable, X-weight cotton backing for working with stainless and carbon steels. Designed to run on a right angle grinder, a flap disc is a one-step alternative to bonded wheels and fiber discs. A unique grinding aid minimizes heat while maintaining life on heat sensitive alloys such as stainless steel.

3M-engineered ceramic aluminum oxide blend abrasive is fast-cutting and efficient
Exceptional life on hard metals
Runs cool due to grinding aid
Good for mild deburring and flat finishing

Premium Deburring, Grinding and Finishing

For Right Angle Grinders

Long Lasting Performance

Industry Low Price

Product Dimensions	Imperial	Metric
Diameter	4-1/2 in	114.3 mm

Shipping Dimensions
Weight	2.3 lb
Length	6.4 in
Width	5.8 in
Height	6.2 in

Color	Orange
Maximum Speed	13,300 rpm
Grit	P60

Pdf Brochures_stainless steel fini
Safety Data Sheet

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Flap Discs Do Double Duty
Grind and finish in a single step with the 3M™ Flap Disc 747D. Flap discs provide the stock removal capabilities of a bonded wheel with the surface finishing characteristics of a resin fiber disc.

Lower cost per grind and fewer process steps in applications such as weld grinding, deburring, rust removal, edge grinding, and weld seam blending make a flap disc desirable when it's an option.

Flap discs exhibit lower gouge potential than that of grinding wheels and fiber discs. Operators prefer the discs because they are lighter in weight and easier to control. And because they do double duty, there is less downtime to change product. Also, less vibration and noise mean less operator fatigue.

While these flap discs are particularly suited to working with stainless steel, their versatility allows them to work effectively on other metals as well.

Overlapping Flaps Use All the Abrasive Grain
A series of abrasive cloth flaps are attached to a backing in a fan-like arrangement around a hub. The working mineral is consolidated on the edge of the disc so a maximal amount of the working material is utilized. As the flaps wear during use, new cutting grain is continually exposed to the work surface, so they can far outlast typical discs.

By reducing steps and lasting longer, flap discs can greatly improve productivity in grinding operations.

Quick-Change Attachment System
The 747D quick-change flap disc features a TN-style attachment system. Screw the old disc off and the new one onto the shaft of your right angle grinder with two or three swift twists. Less time lost to change-over means more producing material.

3M knows efficiency is key to your operations and has leveraged a broad platform of technological expertise to build solutions to keep your business and your employees working smoothly. Add to cart