3M™ Diamond Microfinishing Film Roll 675L, 20 Mic 5MIL, Beige, 4 in x 50 ft x 3 in (101.6mmx15.25m), Keyed Core, ASO, 1 ea/Case

$1,176.53 / Roll

SKU	7000044974
Legacy SKU	60440124828
UPC	00051141205700
Product Number	675L

Designed with a strong polyester film backing and sharp diamond mineral, the 3M Diamond Microfinishing Film Roll 675L delivers fine finishes on hard metals like thermal spray coating, ceramics, carbides, chilled iron and granite.

Micron-graded diamond mineral delivers close tolerance precision finishes for medium stock removal
Enables slow abrasive feed rates and fewer steps which reduces abrasive costs
Polyester film backing allows roll to be used dry or wet with surface lubricants
An exceptional roll for thermal spray finishing of contour / complex shapes
Color coded to reduce the risk of error and mixing up abrasive grades

Add to cart

Durable

Superior Protection

Global Shipping

Industry Low Price

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null

Shipping Dimensions
Weight	1.62393 lb
Length	14.01575 in
Width	14.01575 in
Height	4.80315 in

Color	Beige

PRODUCT FAQ

What is the purpose of 3M™ Diamond Microfinishing Film Roll 675L?

The 3M™ Diamond Microfinishing Film Roll 675L is designed to provide consistent, high-quality finishes on hard materials such as glass and ceramics.
What size is the film roll?

The film roll measures 4 inches (101.6mm) wide by 50 feet (15.25m) long with a keyed core.
How many rolls come in a case?

There is one roll per case of the 3M™ Diamond Microfinishing Film Roll 675L.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

High-quality Materials for Micro-finishing

Introducing the 3M™ Diamond Microfinishing Film Roll 675L – a top-of-the-line product that securely anchors micron-graded diamonds to a polyester film backing. The polyester film backing is known for its strength and resilience, which keeps the abrasive from skidding or deflecting when run. This backing helps the superabrasive belt stay taut and tough so that it can withstand heavy-duty finishing. Additionally, the belts are color coded by grade to help you reduce the risk of selecting the wrong grade.

Waterproof Backing

Not only is the polyester film backing strong, but it is also water resistant. This means that the abrasive may be run with a wet surface lubricant, which helps wash away unwanted swarf and debris and keeps the abrasive running cool. When used in roll form for a process like superfinishing, the 675L roll enables slow abrasive feed rates and requires fewer steps, because of its durability, which in turn can reduce costs.

Tips for Achieving Desired Roughness Average

Many micro-finished products require a specific Ra, or roughness average. To obtain the desired Ra when applying thermal spray coatings, experts recommend following a unique sequence of steps tailored to the substrate. For example, a Ra of 2.5 to 5 on Tungsten Carbide will likely require a film with grade 74u followed by films 45u, 30u and 20u. It is important for operators to consider these factors – Ra and substrate – when selecting the grade of film for this belt.

Overall, this micron-graded diamond abrasive delivers the desired finish without compromising the integrity of the substrate. Its strength and versatility make it a suitable abrasive for your finishing needs.