A smooth ride
through rough waters
through rough waters
Welcome Guest
3M™ Acryl Putty, 05095, White, 14.5 oz, 12 tubes per case
$24.70 / Each
| SKU | 7000045479 |
|---|---|
| Legacy SKU | 60455049217 |
| UPC | 00051131050952 |
| Part Number | 05095 |
3M™ Acryl Putty restores smooth, flawless surfaces by filling small pinholes, scratches, stone chips and other minor blemishes in automotive and marine finishes. This acrylic putty offers easy sanding, smooth spreading and low shrinkage.
- Putty fills minor surface imperfections
- Easy working properties include good spreadability
- Leaves smooth edges with quality feathering
- Low shrinkage offers better final results
- Available in fast, medium and slow drying formulas
Product Dimensions |
Imperial | Metric |
| Weight | 1.0113 LBS |
|---|
Shipping Dimensions |
|
| Weight | 12.55 lb |
|---|---|
| Length | 10.375 in |
| Width | 7.875 in |
| Height | 9.563 in |
| Color | White |
|---|
- Pdf Data Sheets_tsd 05095 3m acryl
- Data Sheet
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. 
Patch Minor Imperfections
3M™ Acryl Putty fills minor surface blemishes in cars, trucks, vans, boats and other vehicles. This acrylic glazing putty offers excellent workability with easy and smooth spreadability that effectively conceals pinholes, sand scratches and other spot repairs. Once the putty fully cures, you'll appreciate its low rate of shrinkage and excellent adhesion to the surface.
Better Feathering Means Less Work
This spot putty offers high quality feathering properties, meaning it is easy to smooth out the edges to blend with the surrounding surface. Good feathering will produce more satisfactory results and reduce sanding.
Choose the Putty that's Right for You
3M™ Acryl Putty comes in multiple formulas offering different rates of drying, working time and sanding time. Use these numbers as estimates only. Actual drying, work and sanding times will vary depending on environmental conditions.
Formulas Include:
3M™ Acryl-White Putty is a slow drying formula with a 2.5 minute work time and 25 minute sanding time
3M™ Acryl-Red Putty is a medium drying formula with 2 minute work time and 20 minute sanding time
3M™ Acryl-Green Putty is a fast drying formula with a 1.5 minute work time and 15 minute sanding time
Directions for Use:
Do not apply when ambient temperatures are below 55ºF or above 110ºF. Use in a well ventilated area away from sparks or open flame. (Do not apply material below the water line unless top coating.)
For best results apply only over clean primed surfaces. (Use compressed air to remove any dust contamination).
Apply using a plastic or metal spreader pressing the putty firmly into the imperfections; keep the application thickness to 1/16" or less. Apply in thin coats instead of one thick application.
Allow to dry prior to sanding. Sand (wet or dry) using 3M™ abrasives in the following sequence: P180, P220, P320. Note: As with any putty, longer drying times will occur with high humidity, thick applications and low temperatures.
Re-clean surface prior to priming or top coating. (Follow paint manufacturer's recommendation for priming and top coating). Add to cart
3M™ Acryl Putty fills minor surface blemishes in cars, trucks, vans, boats and other vehicles. This acrylic glazing putty offers excellent workability with easy and smooth spreadability that effectively conceals pinholes, sand scratches and other spot repairs. Once the putty fully cures, you'll appreciate its low rate of shrinkage and excellent adhesion to the surface.
Better Feathering Means Less Work
This spot putty offers high quality feathering properties, meaning it is easy to smooth out the edges to blend with the surrounding surface. Good feathering will produce more satisfactory results and reduce sanding.
Choose the Putty that's Right for You
3M™ Acryl Putty comes in multiple formulas offering different rates of drying, working time and sanding time. Use these numbers as estimates only. Actual drying, work and sanding times will vary depending on environmental conditions.
Formulas Include:
3M™ Acryl-White Putty is a slow drying formula with a 2.5 minute work time and 25 minute sanding time
3M™ Acryl-Red Putty is a medium drying formula with 2 minute work time and 20 minute sanding time
3M™ Acryl-Green Putty is a fast drying formula with a 1.5 minute work time and 15 minute sanding time
Directions for Use:
Do not apply when ambient temperatures are below 55ºF or above 110ºF. Use in a well ventilated area away from sparks or open flame. (Do not apply material below the water line unless top coating.)
For best results apply only over clean primed surfaces. (Use compressed air to remove any dust contamination).
Apply using a plastic or metal spreader pressing the putty firmly into the imperfections; keep the application thickness to 1/16" or less. Apply in thin coats instead of one thick application.
Allow to dry prior to sanding. Sand (wet or dry) using 3M™ abrasives in the following sequence: P180, P220, P320. Note: As with any putty, longer drying times will occur with high humidity, thick applications and low temperatures.
Re-clean surface prior to priming or top coating. (Follow paint manufacturer's recommendation for priming and top coating). Add to cart