Scotch-Brite™ Multi-Finishing Wheel is a convolute-constructed wheel that provides cleaning and final finishing for stainless steel, aluminum, brass, copper, and other metals. The combination of mineral grades and soft density make the wheel well suited for final finishing applications where a high degree of conformability and less density are needed.
- Provides uniform grain for final finishing on stainless steel, ferrous, and non-ferrous metals
- Highly conformable for consistent finishing on contoured, curved and other surfaces
- Moderate aggressiveness and lighter density provide controlled wear for consistent results over the life of the wheel
- Convolute construction provides a balanced, smooth running wheel throughout product life
- Open, non-woven web runs cool and lessens impact on heat-sensitive materials
|Diameter||6 in||152.4 mm|
|Maximum Speed||6,000 rpm|
What is the Scotch-Brite™ Multi-Finishing Wheel used for?
The Multi-Finishing Wheel is great for a range of finishing and light deburring applications. It's commonly used on metals, plastics, ceramics and other composites.
How coarse are these wheels?
This wheel has a coarse grade with 2S rating--meaning it can help remove larger burrs and leave an initial finish on your material that you want to desurface or blend.
What size is this particular unit?
The MU-WL Multi-Finishing Wheel measures 6 inches by 2 inches by 1 inch so you'll be able to cover more surface area quickly in order to complete tasks effectively
How long might this unit last while I use it frequently?
It should last quite some time because the fibers have been bonded throughout the pad. If anything appears not working as it normally does, kindly give us a call and we will address any issues
. In what quantities do these come in?
.There’s two per case!
The Scotch-Brite™ Multi-Finishing Wheel is an excellent choice for achieving #3 or #4 finishes on stainless steel and other metals on flat, contoured, and curved surfaces. The wheel is designed with an open-web construction that resists loading and runs cool, reducing the risk of part discoloration and warping while extending the wheel's life. The Multi-Finishing Wheel is available in coarse, medium, and fine grade abrasive.
The Multi-Finishing Wheel uses silicon carbide abrasive, which is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. Although it breaks down faster than aluminum oxide, it produces a superior finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results for the life of the product. The material used in the Multi-Finishing Wheel runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.