The Standard Abrasives™ General Purpose Hand Pad can be used for numerous hand applications – use it to clean, blend, finish, polish, deburr, and prepare surfaces for paint or other coatings. It is designed for use on metal, composite, or plastic surfaces and can be used wet or dry.
- Durable non-woven, open web construction won’t shred, rust or splinter like steel wool
- Performs well and comfortably on a wide variety of tasks by hand
- Flexible pad easily conforms to contours and reaches into tight spaces
- Washable, reusable and rust-proof
- Tough aluminum oxide mineral removes light oxidation and rust
- A good alternative to steel wool, files, scrapers, wire brushes and sandpaper sheets
|Width||6 in||152.4 mm|
|Length||9 in||228.6 mm|
What is the Standard Abrasives™ General Purpose Hand Pad used for?
The Standard Abrasives™ General Purpose Hand Pad 827505 is designed for light sanding and finishing tasks such as removing rust and cleaning metal surfaces.
How many pads come in a case?
Each case of Standard Abrasives™ General Purpose Hand Pads contains 60 individual pads.
What size are these hand pads?
Our Standard Abrasives™ General Purpose Hand Pad measures 6 inches by 9 inches, making it easy to use with one or both hands.
Is this product suitable for wet applications?
Yes, our general purpose hand pad can be used wet or dry depending on the application requirement.
. Are there any specific safety precautions that I should follow while using this product?
. It is advisable to wear appropriate personal protective equipment (PPE) which includes gloves, respiratory protective devices, eye protection etc., while using this abrasives product.
The Standard Abrasives™ General Purpose Hand Pad is a non-woven abrasive pad with the flexibility to fully cover contours as well as get into tight corners, ridges, and other uneven surfaces. It offers a moderate level of aggressiveness, making it a great option for many maintenance and repair operations (MRO). Use it by hand or with a hand pad block.A Steel Wool Alternative
The General Purpose Hand Pad is an excellent substitute for steel wool, files, scrapers, wire brushes, and sandpaper sheets. The high-grade resin system is robust and durable, yet the open web is soft and pliable. Nylon fibers on the pad will not splinter, as steel wool tends to do, which helps enhance operator comfort and safety. The fibers are interspersed with sharp-cutting aluminum oxide mineral, a sharp and friable mineral that fragments under heat and pressure to reveal sharp cutting edges. While nylon fibers break down, fresh mineral is exposed, so the abrasive cuts sharper for longer. As you apply even and persistent pressure, a consistent scratch pattern is revealed. These nonwoven fibers are also spongy and responsive, so they minimize gouging or marring of the workpiece.Ease of Use
The Standard Abrasives™ General Purpose Hand Pad may be used dry, with solvents, or with water-based detergents, depending on your application and project needs. Using these compounds may help wash away unwanted swarf and debris while you clean. Moreover, the pad can be washed between uses for repeated use, without rusting. To enhance grip and help reduce operator fatigue, the hand pad can be fastened to a hand pad holder (sold separately). The 6 by 9-inch pad may also be cut and shaped to fit smaller surface areas if desired. With up to 60 pads per case, the need for ordering replacements may also be reduced.