Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

Standard Abrasives™ Quick Change Buff and Blend GP Disc, 840115, A/O VF, TSM, Maroon, 1 in, Die QS100NM, 50/Car, 10 Cartons/Case

Standard Abrasives™

$0.85 / Each

SKU 7000046849
Legacy SKU 66000006842
UPC 00051115330834
Product Number 840115

A good starting point for many different light-duty applications, the Standard Abrasives Quick Change Buff and Blend GP Disc is a versatile non-woven abrasive disc designed to lightly blend, clean, deburr and finish smaller areas on a variety of metals. The quick change system offers both convenience and a secure attachment to the tool, enhancing operator efficiency and productivity.

  • Moderately aggressive material offers great versatility and may be used for a variety of light-duty industrial applications, including cleaning and deburring
  • Multi-purpose abrasive works well on most metals
  • Easy fastening and swapping of quick change discs enhances tool efficiency and worker productivity
  • Tough nylon web cleans and deburrs without tearing but leaves a professional finish
  • Open web is flexible and pliable, so it will not gouge the substrate and sustains part geometry
  • Open web is load resistant, limiting buildup of debris and prolonging service life
  Add to cart
On it's way to you October 1   

Qty

Minimum Order 50 Items
Order Increment 50 Items
  For Aggressive Cutting
  Multi-Functional
  Versatile Across Industries
  Industry Low Price
Product Dimensions
 Imperial Metric
Weight 0 NULL
Width 0 null
Length 0 null
Height 0 null
Diameter 1 in 25.4 mm
Center Hole Diameter 0 NP 0.0 NP
Shipping Dimensions
Weight 3.799 lb
Length 23.74016 in
Width 9.6063 in
Height 5.11811 in
Color Maroon
Thread Size Non Pertinent
Maximum Speed 12,000 rpm

PRODUCT FAQ

  1. What materials is the Standard Abrasives™ Quick Change Buff and Blend GP Disc suitable for?

    The Quick Change Buff and Blend GP Disc is designed to work on a wide variety of metals, including aluminum, carbon steel, stainless steel, fiberglass and plastic.

  2. How long does each 3M quick change abrasive disk last?

    The lifespan of the Standard Abrasives™ Quick Change Buff and Blend GP Disc will vary depending on usage. However, it can provide increased cut rate and durability compared to non-woven abrasive products.

  3. Can this disc be used without any adapters?

    No adapter is needed as this product has a Twist-Turn locking system that makes changing discs fast and easy while ensuring secure attachment. It uses TSM mounting which stands for "twist-on" style mini—a feature that keeps common maintenance tools off your production line by enabling simple disengagement with a half turn.This speeds up the process & helps save time in tool setup.In addition Die QS100NM holds PSA (Pressure sensitive adhesive) or Hook-&-Loop backing.The overall performance increases owing to its maroon colour special finishing.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Moderately Aggressive for Lighter-Weight Applications

The Standard Abrasives™ Quick Change Buff and Blend GP Disc is a versatile multi-purpose product for general-duty industrial applications. It offers equal parts fast cut and fine finish, making it perfect for removing light oxidation, blending minor surface imperfections, cleaning surfaces prior to coatings, removing small burrs, and performing basic equipment cleanup. The maroon GP material is moderately aggressive and has a flexible open web that conforms to workpiece contours, radii, and internal diameters. Its non-woven construction makes the disc spongy and responsive, ensuring an aggressive cut without gouging or marring the substrate.

Options to Suit Many Different Surfaces

The Quick Change Buff and Blend GP Disc is a versatile and multi-purpose product that suits many different applications. It comes in a range of grades from Coarse (CRS) to Very Fine (VFN) and disc diameters up to 5 inches. It works well on a variety of substrates, including ferrous and non-ferrous metals, aluminum, high nickel/chrome alloys, and stainless steel.

Quick Change Systems Improve Productivity

The Quick Change Buff and Blend GP Disc features a quick change system that allows tool-free swap outs, maintains secure attachment at high speeds, and saves operators time when switching discs between grades or applications. Easy fastening and swapping of discs enhances tool efficiency and worker productivity. Choose the disc compatible with your TP, TR, or TS holder pad. The TP system features a snap-on/snap-off nylon fastening hub. TR discs have a nylon threaded male hub that easily mounts to TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS system has a metal hub that fastens to its holder pad with a simple twist.

The Many Benefits of Standard Abrasives™ Non-Woven Products

Standard Abrasives™ Buff and Blend non-woven products offer many benefits. All Buff and Blend products have an open web that combines abrasive mineral and non-woven nylon fibers with a resin-reinforced bond. The resin bond securely anchors mineral to the fibers, making for a strong, durable abrasive. Gaps between fibers allow swarf to escape, so the abrasive does not get clogged with debris. Minimizing swarf and debris prolongs abrasive service life and keeps minerals cutting sharper for longer. Nylon fibers won't splinter during grinding, offering a good alternative to steel wool. Moreover, as the fibers break down and fresh mineral is exposed, it reduces the likelihood of dull or blunt mineral smearing the surface. Standard Abrasives™ Buff and Blend products deliver a consistent cut and finish - part after part.

Brochures, Catalogs & Data Sheets
  Add to cart