A smooth ride
through rough waters
through rough waters
Welcome Guest
Standard Abrasives™ Buff and Blend Cross Buff GP, 725004, A/O Coarse, 1-1/2 in x 1/2 in x 2 Ply x 8-32, 50 per inner, 500 per case
$5.45 / Each
| SKU | 7000047136 |
|---|---|
| Legacy SKU | 66000047499 |
| UPC | 00051115371493 |
| Part Number | 725004 |
Standard Abrasives™ Buff and Blend Cross Buff GP is a go-to product for stubborn surface areas requiring a unique, conformable construction.
- Uniquely designed to clean and polish inside hard-to-reach areas like internal diameters of pipes and tubing
- May be used with a lubricant to run cool and wash away swarf
- Available in abrasive grades from Very Fine (VFN) to Coarse (CRS) to meet a wide variety of finish requirements
- Open-web buff responds to surface imperfections while minimizing gouging of the substrate
- Up to 500 abrasives per box minimizes replacement orders and helps lower operating costs
Product Dimensions |
Imperial | Metric |
| Width | 0 np | 0 NP |
|---|---|---|
| Diameter | 1-1/2 in | 38.1 mm |
Shipping Dimensions |
|
| Weight | 19.373 lb |
|---|---|
| Length | 26.125 in |
| Width | 10.75 in |
| Height | 4.625 in |
| Color | Brown |
|---|---|
| Maximum RPM | 20,000 |
- Pdf Catalogs_standard ab coated bo
- Safety Data Sheet
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. 
Refine Surfaces
While discs or wheels may be unable to get inside a narrow pipe or tube, Standard Abrasives™ Buff and Blend Cross Buff GP was designed to do just that. The abrasive fingers are spring-like and bend and move to accommodate the inner diameter of the workpiece. They refine the surface while maintaining the geometry of the part.
The abrasive material on Cross Buff GP is a great all-purpose material for cleaning and polishing. The mineral cuts sharp while still delivering a fine polish. Cross Buff GP comes in a range of grades from very fine (VFN) to coarse (CRS). Typically, very fine and fine grades are useful when a soft scratch pattern is desired, whereas a medium or coarse grade delivers a more aggressive scratch. Given its versatility, this abrasive is well-suited for removing surface oxidation, rust and surface coatings for part inspection, as well as surface preparation prior to coating. It can help remove corrosion on Steel Rule and Kirksite dies. It's also great for polishing round and square tubing, valve spools, molds, dies and inside diameters of lifter bores, valve bodies and brake cylinders.
Attachment Styles
Standard Abrasives™ Buff and Blend Cross Buff GP fasten to a mandrel that in turn can be fastened to the power tool. The cross buffs attach to the mandrel with their 8-32 or 1/4-20 thread options.These versatile attachment options make it easier to securely mount and fasten the buff to the tool, helping to increase productivity.
Benefits of Open Web Abrasives
In addition to the unique design of the Standard Abrasives™ Buff and Blend Cross Buff GP, the open web construction also adds a level of sponginess and flexibility. This open web material is created by combining nonwoven nylon strands and abrasive mineral with resin. Gaps between the nylon fibers allow unwanted swarf to escape, enhancing load resistance. As the abrasive is less likely to clog with debris, the mineral keeps cutting sharper, longer.
The open web material is waterproof and may be used with lubricants, which help to keep the abrasive running cool and wash away swarf. The load-resistant properties of the web, combined with the swarf-cleaning action of the lubricant, help to prevent workpiece contamination. As debris clears away, the likelihood of the disc smearing or blemishing the substrate decreases. Add to cart
While discs or wheels may be unable to get inside a narrow pipe or tube, Standard Abrasives™ Buff and Blend Cross Buff GP was designed to do just that. The abrasive fingers are spring-like and bend and move to accommodate the inner diameter of the workpiece. They refine the surface while maintaining the geometry of the part.
The abrasive material on Cross Buff GP is a great all-purpose material for cleaning and polishing. The mineral cuts sharp while still delivering a fine polish. Cross Buff GP comes in a range of grades from very fine (VFN) to coarse (CRS). Typically, very fine and fine grades are useful when a soft scratch pattern is desired, whereas a medium or coarse grade delivers a more aggressive scratch. Given its versatility, this abrasive is well-suited for removing surface oxidation, rust and surface coatings for part inspection, as well as surface preparation prior to coating. It can help remove corrosion on Steel Rule and Kirksite dies. It's also great for polishing round and square tubing, valve spools, molds, dies and inside diameters of lifter bores, valve bodies and brake cylinders.
Attachment Styles
Standard Abrasives™ Buff and Blend Cross Buff GP fasten to a mandrel that in turn can be fastened to the power tool. The cross buffs attach to the mandrel with their 8-32 or 1/4-20 thread options.These versatile attachment options make it easier to securely mount and fasten the buff to the tool, helping to increase productivity.
Benefits of Open Web Abrasives
In addition to the unique design of the Standard Abrasives™ Buff and Blend Cross Buff GP, the open web construction also adds a level of sponginess and flexibility. This open web material is created by combining nonwoven nylon strands and abrasive mineral with resin. Gaps between the nylon fibers allow unwanted swarf to escape, enhancing load resistance. As the abrasive is less likely to clog with debris, the mineral keeps cutting sharper, longer.
The open web material is waterproof and may be used with lubricants, which help to keep the abrasive running cool and wash away swarf. The load-resistant properties of the web, combined with the swarf-cleaning action of the lubricant, help to prevent workpiece contamination. As debris clears away, the likelihood of the disc smearing or blemishing the substrate decreases. Add to cart