3M™ Double Coated Urethane Foam Tape 4008 is an off-white, 0.125 in. (3.2 mm) thick, double coated, open cell urethane foam tape that offers high shear strength. It is ideal for applications such as mounting interior signage and nameplates and areas where 1/8 in. thick foam is needed for gap filling applications.
- Off-white, 0.125 in. (3.2 mm) open-cell, flexible urethane foam carrier
- High shear adhesive with high temperature resistance
- Durable foam is ideal for interior mounting applications
- Ideal for bonding, attaching, and mounting
- Thick foam dampens and prevents vibration and open-cell structure aids component cooling
|Width||15 in||381 mm|
|Length||36 yd||32.91 m|
What is the width and length of a roll of 3M™ Double Coated Urethane Foam Tape 4008?
The tape comes in a single off-white color roll measuring 15 inches wide by 36 yards long.
How thick is the foam on this tape?
With a thickness of 125 mil, this double coated urethane foam tape provides excellent adhesion to both high and low surface energy substrates.
Can I buy just one roll or do I need to purchase an entire case?
Each order consists of one convenient roll per case that measures at the dimensions previously mentioned.
Is there any specific way to apply this adhesive foam tape for maximum use?
. Yes! It's important for optimal usage of our products that you clean all surfaces before using it. Additionally make sure to not touch the adhesive side with your fingers as oils from skin can affect its effectiveness.
3M™ Double Coated Urethane Foam Tape 4008 is a 1/8 in. thick tape manufactured with 3M™ Adhesive 100 for a strong, permanent bond that works well with the open cell foam structure to produce high shear strength. This tape offers an ideal solution for a wide selection of bonding issues on various surfaces. This includes both interior and exterior applications where the tape will be protected from the environment.
This tape features a conformable foam and adhesive combination which provides long-term holding at temperatures up to 220°F (104°C). By using a robust, green plaid, densified kraft paper liner, this tape provides you with reliable performance for industrial applications, such as die-cutting and automated dispensers. The liner also helps reduce edge roll and protects the tape from humidity extremes.Recommended Applications
- General interior and exterior mounting applications where the tape will be protected from the environment
- Mount interior signs and nameplates
- Mounting dispensers and air fresheners
- Bond acoustic panels to walls
- Electronic applications where a thicker foam tape is needed
3M™ Adhesive 100 is a firm, acrylic, pressure sensitive adhesive system that features high ultimate bond strength, very good high temperature, solvent resistance and very high shear holding power. Bond strength increases substantially with natural aging. 3M™ Adhesive 100 is well known in the industry for environmental and chemical resistance. For many applications, any one of the products in this grouping will perform satisfactorily when exposed to different chemicals or temperatures. The adhesive offers excellent bond to metal and high surface energy plastics and good temperature and chemical resistance.
What is Double Coated Tape?
In general, double coated tape is composed of a foam, paper, film, or tissue carrier that is coated on both sides with pressure sensitive adhesive. The adhesive is protected by a peel-away liner that can be removed at the time of application or left in place until the joining surfaces are ready to be attached. These tapes can be applied by hand or with a dispenser. Double coated tape dispensers are available in a variety of configurations ranging from manual to fully automatic. Applications for double coated tape are found in construction, fabrication, arts, and hobby.
Brochures, Catalogs & Data Sheets
- Pdf Brochures_3m industrial adhesi