3M™ All Weather Flashing Tape 8067, Tan, Non-Slit Liner, 2 In x 75 Ft, 24/Case

$18.92 / Roll

SKU	7000049773
Legacy SKU	70006745049
UPC	00051111983027
Catalog Number	8067
Product Number	8067

3M All Weather Flashing Tape 8067 is a self-adhered, waterproof flashing membrane designed for sealing around openings and penetrations in exterior walls. This product has a unique acrylic pressure sensitive adhesive that aggressively sticks and stays stuck both at lower and higher application temperatures than traditional flashing tapes. It even adheres to damp surfaces.

STICKS AND STAYS STUCK: Unique acrylic pressure sensitive adhesive sticks and stays stuck to seal around windows, doors and other openings – eliminating the need for primers or staples.
BONDS TO MOST COMMON BUILDING MATERIALS with surface temperatures as low as 0F (-18C) or as high as 176F (80C). It even adheres to damp surfaces.
CONFORMS AND SEALS: To prevent moisture intrusion, the thin backing construction effectively conforms and seals around nails and staples with less buildup under siding.
PASSES NAIL SEALABILITY before and after thermal cycling according to AAMA 711-05.
WILL NOT LIQUEFY, BLEED, OR MELT when in contact with many building sealants (i. e. , synthetic rubber, butyl, polyurethane, silicone, silane terminated hybrids) or in extreme summer temperatures.
FAST APPLICATION: Split-liner for easy and accurate positioning of tape - especially long lengths.

Add to cart

Multiple Application Use

Excellent Sealing Qualities

Weatherproof

Global Shipping

Product Dimensions	Imperial	Metric
Weight	1.15522 lbs
Width	5-3/4 in
Length	5-3/4 in
Height	2 in
Thickness	9.9 mil	0.25 mm

Shipping Dimensions
Weight	28.88717 lb
Length	12.08661 in
Width	12.08661 in
Height	13.22835 in

Color	Tan

PRODUCT FAQ

What is the 3M™ All Weather Flashing Tape 8067 used for?

The 3M™ All Weather Flashing Tape 8067 is a durable, self-adhered flashing tape that seals around openings and penetrations in exterior walls. It helps keep out moisture, air and insects while providing superior adhesion.
Can this tape be used on all types of surfaces?

Yes! This tape can adhere to common building substrates such as plywood, OSB, metal, vinyl, concrete or other masonry surfaces without the need for primer (except pressure-treated lumber).
What temperature range does the All Weather Flashing Tape withstand?

This flashing tape has been specifically designed to perform at temperatures ranging from -40°F/-40°C to 240°F/115°C.
How much of this product comes in a case?

Each case contains 24 rolls of tan-colored non-slit liner flashing tape with dimensions of 2 inches x75 feet per roll.
. Is the installation process easy or complicated.

. The installation process is extremely simple as long as you follow these steps properly- Clean surface thorougly before applyling it; start applying from one corner then work your way across pressing any bubbles out along the way and lastly apply a seam roller over it after drying completely

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Bonds to Most Common Building Materials without Primers and Staples

3M™ All Weather Flashing Tape 8067 is designed to solve the most critical flashing problems while increasing productivity. Its unique acrylic pressure sensitive adhesive sticks and stays stuck to seal around windows, doors, and other openings. The thin backing construction effectively conforms and seals around nails and staples with less buildup under siding to prevent moisture intrusion. Additionally, its proprietary construction will not liquefy, bleed, or melt in contact with many building sealants or in extreme summer temperatures.

Recommended Applications

Sealing joints around sills, jambs, and heads of rectangular windows in wood frame construction
Sealing around other wall interruptions in non-roof areas, such as thresholds, dryer vents, and hose bibs
When installed properly as a concealed flashing in vertical walls in frame construction, it prevents moisture intrusion or water leaks and avoids the costly problems caused by water infiltration

3M™ All Weather Flashing Tape 8067 resists UV exposure for up to 12 months. It can be applied to materials without primers or staples and bonds in surface temperatures from 0° to 176°F (-18° to 80°C) per AMAA 711-05. Its proprietary backing seals around nails and staples to prevent moisture intrusion. This backing is also tough, resists punctures and tears, yet it is thin to fit conveniently into corners and under siding. The split paper release liner provides fast application with easy and accurate positioning of the tape.