Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

Scotch-Brite™ Roloc™ Finishing Flap Brush, 3 in x 1-3/8 in S FIN, 10 per case

Scotch-Brite™

$24.04 / Each

SKU 7000077968
Legacy SKU FN510079372
UPC 00048011147833
Product Number FF-ZR

Scotch-Brite™ Roloc™ Finishing Flap Brush is constructed from sections of non-woven material slit lengthwise and bonded to a cylindrical core. Its durable yet responsive design make it ideal for finishing applications.

  • Achieves decorative finishes on metal, wood and composites
  • Coarse (CRS) and fine (FIN) abrasive grades produce brushed surfaces without compounds
  • Can provide a long scratch when run slowly or a shorter scratch when run faster
  • Continuously supplies fresh mineral for consistent, uniform finishes
  • Open web is load and heat resistant, enabling fine finishing results on a variety of materials
  Add to cart
On it's way to you October 5   

Qty

Minimum Order 10 Items
Order Increment 10 Items
  High-Quality Materials
  Multi-Functional
  Adaptable
  Industry Low Price
Product Dimensions
 Imperial Metric
Width 1.37 in 34.925 mm
Diameter 3 in 76.2 mm
Shipping Dimensions
Weight 1.9687 lb
Length 9.488 in
Width 6.299 in
Height 4.094 in
Color Gray
Maximum Speed 8,000 rpm
Grit Non Pertinent

PRODUCT FAQ

  1. What is the Scotch-Brite™ Roloc™ Finishing Flap Brush used for?

    The Scotch-Brite™ Roloc™ Finishing Flap Brush is designed to provide a high-quality finish on metals, plastics, and other materials.

  2. How big is the brush?

    The size of this product is 3 in x 1-3/8 in S FIN.

  3. How many brushes come per case?

    Each case contains ten brushes per case.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Improved Consistency and Greater Control

The Scotch-Brite™ Roloc™ Finishing Flap Brush is a chemical-free solution for achieving fine finishes. It is perfect for aesthetic finishing applications, smoothing wood fibers, defuzzing wood, plastic, and composite surfaces, and sealer scuffing. This long-lasting brush provides improved consistency and greater control over a number of critical prep and finishing tasks, such as brushed finishes on copper, brass, stainless steel, aluminum, and other metals.

Made with Aluminum Oxide Mineral and Roloc™ Attachment System

The Scotch-Brite™ Roloc™ Finishing Flap Brush is designed with aluminum oxide mineral in the CRS grade and silicon carbide in the FIN grade. Aluminum oxide is widely used in grinding applications due to its high cut-rate, hardness, strength, and low heat retention. It is suitable for a wide variety of substrates in both woodworking and metalworking, including ferrous alloys. Silicon carbide is used for finer finishing and offers a very sharp mineral to create different aesthetic finishes. Additionally, the Scotch-Brite™ Roloc™ Finishing Flap Brush comes with a Roloc™ attachment, making brush to tool attachment swift and easy.

The Many Benefits of Open Web Abrasives

Scotch-Brite™ industrial abrasives are unique due to their nonwoven technology. A combination of fiber strands, resin, and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece. This reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance, and extremely long service life. Scotch-Brite products may enhance productivity while reducing the need for cleaning chemicals and wire brushes. From aesthetic finishing to weld blending, deburring, and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part.

Applications
Machines
Brochures, Catalogs & Data Sheets
  Add to cart