Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
SKU 7000118164
Legacy SKU 60010024812
UPC 00051111608135
Product Number 216U

3M™ Hookit™ Paper Disc 216U is constructed of aluminum oxide on a light-weight paper backing and is suitable for finishing applications with a random orbital sander on wood as well as primer, paint, sealers, topcoats, fiberglass, and plastics. Open coat construction and a load-resistant coating help prevent clogging of the disc to optimize cut and prolong disc life.

  • 3M™ Hookit™ discs are easy to change and reuse, maximizing utility for the life of the disc
  • Aluminum oxide mineral is durable, cuts fast, and performs well on many surfaces
  • Open coat helps to reduce loading
  • Light A-weight paper backing is suitable for finishing
  • Load-resistant coating prevents clogging to optimize cut and disc life
  Add to cart
On it's way to you November 3  


Minimum Order 1,500 Items
Order Increment 1,500 Items
  Superior Cut Rate
  Custom Fit
  Can Use on Many Surfaces
Product Dimensions
Imperial Metric
Diameter 5 in 127 mm
Shipping Dimensions
Weight 5.83 lb
Length 11.3 in
Width 5.9 in
Height 6.3 in
Color Gold
Maximum Speed 12,000 rpm
Grit P600


  1. What is the 3M™ Hookit™ Paper Disc 216U used for?

    The 3M™ Hookit™ Paper Disc 216U is perfect for sanding application on metal, plastics fiberglass and blend panels.

  2. Can I use this disc with any sander?

    Yes, the disc can be used with most orbital and random orbital sanders that have a hook-and-loop attachment system.

  3. What grit level does the P600 rating correspond to?

    The P600 rating corresponds to a fine grit level suitable for smoothing surfaces before painting or other finishes are applied.

  4. How many discs come in each case of the 3M™ Hookit™ Paper Discs?

    Each case contains 500 discs packed inside five inner cases of hundred pieces each.

  5. Is it possible to order a smaller quantity than an entire case of these paper discs?

    . Unfortunately no- our packaging restricts us from selling less than one inner package size (100 pcs). However we do offer different packagings through our distributors that might better fit your needs!

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
The 3M™ Hookit™ Sandpaper Discs

The 3M™ Hookit™ (hook-and-loop) attachment system is designed to make disc changes fast and easy. This means that the disc can be used again and again for the extent of the abrasive life.

When dust loads the cutting surface of the abrasives, sandpaper discs cut less effectively and have a shorter lifespan. The open coat construction of the 3M™ Hookit™ Sandpaper Discs means that the abrasive grains are placed with space between them to help evacuate sanding dust and avoid clogging the cutting edge of the grains. The load-resistant coating also allows the disc to continue cutting even when sanding softwoods, paints, and other materials that would otherwise clog the disc and hinder sanding ability. Together with the 3M™ Hookit™ backing, these features add up to increased productivity and reduced material consumption.

These discs feature an aluminum oxide abrasive, which is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.

  • Fast and easy disc changes with the 3M™ Hookit™ attachment system
  • Open coat construction helps evacuate sanding dust and avoid clogging
  • Load-resistant coating allows the disc to continue cutting even when sanding softwoods, paints, and other materials
  • Aluminum oxide abrasive is tough, durable, and suitable for a wide variety of materials
Brochures, Catalogs & Data Sheets
Other Products in this Family

Lead times are estimates and may vary based on our suppliers' product availability.