3M™ Trizact™ PSA Film Disc 568XA has all the benefits industrial professionals have come to expect from Trizact™ abrasives, including consistent and sharp cutting action. What makes this abrasive unique is the naturally-occurring mineral that's used: cerium oxide. It helps with glass defect repair and acrylic solid surface finishing by minimizing gouging.
- Designed for defect repair, finishing and polishing
- Natural cerium oxide mineral cuts sharply without gouging substrate
- 3M™ Trizact™ microreplication technology enhances consistent cutting action
- Adhesive backing for swift, easy power tool attachment
- Little water required for optimal results
What is the Trizact PSA Film Disc 568XA used for?
The Trizact PSA Film Disc 568XA is primarily used for sanding and finishing applications that require a consistent and uniform finish.
Does this product come in different sizes?
Yes! While the standard size of the disc is 6 inches by NH, we also offer smaller sizes as well. Please contact us to learn more about custom sizing options.
What makes the Trizact PSA Film Disc stand out from other abrasives on the market?
One key feature of Trizact products is their unique micro-replication technology which creates incredibly sharp cutting edges. This allows them to create a precise, consistent finish while maintaining their durability over time. Additionally, they are designed to reduce heat buildup during use thanks to their anti-loading coating technology, which helps prolong abrasive life.
Thank you for your interest in our products - if you have any further questions or would like assistance placing an order please don't hesitate to ask!
3M™ Trizact™ PSA Film Disc 568XA was designed to repair defects on sensitive surfaces such as glass, acrylic, and solid surfacing. These surfaces require an abrasive that can cut aggressively without causing significant gouging or scratching. The mineral, which is adhered to a PSA backing using microreplication technology, cuts consistently and produces a high gloss level that is often desirable during surface finishing. The film backing is water-resistant and requires minimal water for touch-up, reducing mess and processing steps.Swift Tool Attachment
The pressure-sensitive adhesive (PSA) on the back of 3M™ Trizact™ PSA Film Disc 568XA makes it easy to attach to power tools. Simply press it on like a sticker. The PSA backing adheres firmly to a backup pad when light pressure is applied, and it can be peeled off easily, leaving a clean surface for the next abrasive in the sequence. With only a thin layer of adhesive between the abrasive and the backup pad, power is transmitted directly to the workpiece surface, allowing the disc to sand aggressively. Convenient liners reduce contamination of the adhesive, maximizing adherence to the disc pad.3M™ Science, Applied to Trizact™ Abrasives
3M™ Trizact™ abrasives use microreplication technology to revitalize light dimensioning and finishing work by reducing processing steps, increasing throughput, and creating consistency. During microreplication, small three-dimensional structures resembling pyramids are adhered to a backing. These "pyramids" contain layers of mineral, and they begin to break down after repeated use, continually exposing fresh mineral. The cycle of mineral renewal sustains the abrasive's sharpness. Ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed – rather than erratic– contact for a consistent cut.