3M™ Trizact™ Cloth Belt 237AA uses proprietary microreplication technology by 3M where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.
- Self-sharpening pyramids start sharp, stay sharp, and run cooler than conventional abrasives
- Flexible backing for consistent finish over contours
- Three-dimensional design enables very consistent finishes throughout the abrasive life in robotic applications
- For intermediate finishing and fine polishing prior to plating or buffing
- Ideal for intermediate finishing and fine polishing prior to plating or buffing
- Produces finer finishes than conventional electrostatically coated abrasives
|Width||2 in||50.8 mm|
|Length||72 in||1828.8 mm|
What is the dimension of the 3M™ Trizact™ Cloth Belt 237AA?
The dimension of this product is 2 inches by 72 inches.
How many belts are included in each case?
There are a total of 50 belts included in each case.
What type of backing material does this belt have?
This cloth belt has an A16 X-weight paper backing and a Film-lok attachment method.
Is the 3M™ Trizact™ Cloth Belt flexible or rigid?
This Trizact cloth belt features Full-flex technology which allows it to adapt to curves, contours, and profiles while maintaining stability for consistent results every time.
What industries might benefit from using this particular product?
. The Trizact cloth belt would be ideal for use in applications such as metalworking, woodworking, automotive refinishing , composite sanding, glass sanding or any industry where aggressive yet consistent abrasive action is needed.
The 3M™ Trizact™ Cloth Belt 237AA is designed to provide consistent finishes on hard metals such as carbon and stainless steel. The abrasive and resin structure is formulated to break down under medium pressure and keep fresh, sharp mineral cutting. The belt also features a grinding aid that helps prevent heat buildup, warping, and discoloration. The X-weight, durable cloth backing helps provide control, conformability, and effective medium-pressure grinding. The resin bonded abrasive gives you greater heat resistance and helps prevent delamination.Runs Smooth, Finishes Consistently
The belt uses a Film Media Splice, a strong secure bond joining the belt ends, consisting of a thin film-joining media that minimizes "chatter marks," ensures a smooth running belt, and consistent finishing results. Proprietary Trizact™ abrasives produce a finer finish, achieve results faster, and last longer when compared to conventional abrasive products.Ideal for Robotic Finishing and Polishing
3M™ Trizact™ abrasives can consistently deliver near-mirror finishes while also delivering the abrasive life that helps reduce changeouts and downtime in robotic cells. This helps maximize the efficiency of the cell, allowing you to produce more parts per belt. Robotic metal polishing demands the most consistent, refined cut and long abrasive life.The Science of Flawless Finishes
3M™ Trizact™ belts start sharp and stay sharp, resulting in more predictable finishes and improved, consistent quality. They can last up to five times longer than conventional belts and provide precise finish control such that operators can reduce grade sequences, requiring fewer process steps and fewer abrasive products. Three-dimensional structures uniformly distributed over the entire surface of 3M™ Trizact™ abrasives ensure consistent performance and eliminate part to part variation.