Scotch-Brite™ Finishing Flap Brush is constructed from sections of non-woven material slit lengthwise and bonded to a cylindrical core. This long-lasting brush provides improved consistency and greater control over a number of critical prep and finishing tasks, to include polishing and aesthetic finishing, such as brushed finishes on copper, brass, stainless steel, aluminum, and other metals.
- Soft density and med/fine/very fine abrasive grades produce brushed surfaces without compounds
- Provides more surface contact than bristle-type brushes
- Continuously supplies fresh abrasives for consistent, uniform finishes
- Non-woven web is load and heat resistant, enabling fine finishing results on a variety of materials
- Achieves decorative finishes on metal, wood, and composites
|Width||1 in||25.4 mm|
|Diameter||8 in||203.2 mm|
|Center Hole Diameter||3 in||76.2 mm|
|Maximum Speed||3,200 rpm|
What is the Scotch-Brite™ Finishing Flap Brush made of?
The Scotch-Brite™ Finishing Flap Brush is made from a combination of ceramic oxide grain and non-woven material.
Does the brush come in different sizes?
Yes, but this particular one is 8 inches by 1 inch by 3 inches with a grade of 5A very fine grit.
Can I use this brush to remove rust from metal surfaces?
This brush performs its best finishing and blending on only finer metals such as stainless steel, aluminum and brass rather than for heavy-duty surface preparation applications like removing rust or scale.
Are replacement brushes available for purchase separately?
Yes! Replacement brushes are sold separately, however, these 3M stated instructions that you must only replace them once the bristles have worn down after everyday job usage.
. Where can I buy Scotch-Brite™ Finishing Flap Brushes in bulk quantity?
. Please visit our website's store locator page that'll aid you in finding nearby retailers who sell our product along with an ability to make your order online!.
Scotch-Brite™ Finishing Flap Brush requires no chemical compounds to achieve fine finishes and is ideal for all aesthetic finishing applications, smoothing wood fibers, defuzzing wood, plastic, and composite surfaces, and sealer scuffing.
This brush is available with aluminum oxide abrasive mineral. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.