Scotch-Brite™ Surface Conditioning Belt is a durable belt engineered to perform detail work such as blending, blending corners, cleaning, contour finishing, deburring, deburring edges, fine finishing, flat finishing, setting the grain, stainless steel finishing, and attaining straightline-brushed finishes on a variety of metals.
- Nonwoven, surface conditioning belts clean, blend, deburr and finish
- Reduced loading and heat build-up allow extended operating time and consistent surface conditioning results
- Conformability allows abrasive to stay in contact with complex-shaped parts in robotic processing
- Reinforced backing and nonwoven open web material provide superior flexibility for detail work, over contours and edges
- Removes surface imperfections, grind lines, mill, and other marks
|Width||2 in||50.8 mm|
|Length||132 in||3352.8 mm|
What is the size of the Scotch-Brite™ Surface Conditioning Belt, SC-BS, SiC Super Fine, 2 in x 132 in, 5 ea/Case?
The size of our products is as follows: Width=2 inches and Length=132 inches. One Case contains 5 belts.
What surfaces can be finished with Scotch-Brite™ Surface Conditioning Belt, SC-BS?
Scotch-Brite™ Surface Conditioning Belts are recommended for use on all ferrous metals including stainless steels & nonferrous metals like aluminum or brass; plastic and composites.
How fine a finish does this belt leave on metallic surfaces?
The SiC (Silicon Carbide) abrasive grains used to make these belts provide super-fine finishing and deliver consistent results time after time.
Do you offer any warranty or guarantee regarding the quality of your product?
Yes! All our products come with a limited warranty against manufacturing defects.If you have an issue with one of our products please reach out to us right away so we can help make it right!
Scotch-Brite™ Surface Conditioning Belt work well to remove coarse grind lines, mill marks, or small burrs left by cutting tools or conventional abrasives. Abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal.Ideal for Robotic Finishing
With a wide range of conformability options and high consistency, long-lasting Scotch-Brite™ industrial abrasives are a great option for robotic metal finishing. Scotch-Brite™ Surface Conditioning Belts can generate a spec-required, aesthetic finish when used in both manual and robotic processing.Choose the Right Belt for You
3M offers a broad selection of belts to fit most any industrial belt sander. Wide belt sanders are used for sanding and finishing large wood panels. Medium-width belts fit onto edge or portable belt sanders for sanding or blending wood pieces such as cabinet doors, and narrow belts are used with file tools in metalworking to access small areas or inside corners.Hard-Working Minerals: Aluminum Oxide and Silicon Carbide
Scotch-Brite™ Surface Conditioning Belts are manufactured with a choice of silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.An Alternative for Wheels and Discs
Belt sanders are used for rapid grinding, sanding and finishing on a variety of surfaces. Depending on the material being worked, sanding wheels and discs may clog, quickly making them less efficient, while belt sanders continue to sand without clogging because small grooves in the abrasive belt open as they go around the arc of the drive wheel.