through rough waters
Scotch-Brite™ Roloc™ + Clean and Strip Disc 7466, 4 in x 1/2 in, S XCS, 10 ea/Case
$13.56 / Each
| SKU | 7000120779 |
|---|---|
| Legacy SKU | 61500090578 |
| UPC | 00051131074668 |
| Product Number | 07466 |
Ideally suited for rust, coating and weld discoloration removal the Scotch-Brite Roloc Clean and Strip Disc is a long-lasting abrasive that combines silicon carbide mineral with non-woven nylon fibers. This unique disc can aggressively clean without significantly altering the base material.
- Removes paint, rust and quickly without compromising the geometry of the workpiece
- Load resistant material resists clogging for consistent cutting action
- Smear resistant properties avoid extra cleaning of the work surface
- Extra coarse (XCS) grade silicon carbide provides aggressive cutting and leaves a fine finish without gouging the workpiece
- Roloc™ attachment system provides easy disc change out for multi-step finishing processes
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Diameter | 4 in | 101.6 mm |
| Center Hole Diameter | 1 in |
Shipping Dimensions |
|
| Weight | 1.39994 lb |
|---|---|
| Length | 8.26772 in |
| Width | 8.26772 in |
| Height | 3.77953 in |
| Maximum Speed | 8,000 rpm |
|---|
PRODUCT FAQ
-
What is the purpose of the Scotch-Brite™ Roloc™ + Clean and Strip Disc 7466?
The purpose of this disc is to remove surface contaminants including rust, paint, scale, and corrosion. It can also be used for cleaning welds.
-
What size are the discs?
These discs are 4 inches in diameter with a thickness of half an inch.
-
How many discs come in a case?
There are 10 discs per case.
-
What does "S XCS" mean?
"S" stands for Extra Course Silicon Carbide Mineral. "XCS" stands for Extra Course Scrim which provides extra strength to the fibers that make up the disc. Together they indicate that this product can handle tough industrial cleaning tasks.
The Scotch-Brite™ Roloc™ Clean and Strip Disc uses a resin to bind silicon carbide mineral and non-woven nylon fibers. Over time, the resin dissolves and breaks down, helping the abrasive stay strong and resist heat. With the convenience of the Roloc™ attachment system, disc change-out for multi-step finishing processes is both quick and easy. The disc swiftly mounts to a holder pad (sold separately) which, subsequently attaches to abrasive tools like die grinders and right angle disc sanders.
Silicon Carbide MineralThe Scotch-Brite™ Roloc™ Clean and Strip Disc uses silicon carbide, a sharp synthetic mineral commonly used for low-pressure applications such as paint prep. Although it breaks down faster than aluminum oxide, it produces a superior finish. The extra coarse (XCS) mineral works hard to remove unwanted corrosion and blemishes from a variety of substrates. It aggressively removes paint and rust from seams, door jambs, drip moldings, pinchwelds, and other difficult-to-reach areas.
The Many Benefits of Open Web AbrasivesScotch-Brite™ industrial abrasives are unique due to their nonwoven technology. A combination of fiber strands, resin, and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral.
- Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency
- Superior cut performance
- Extremely long service life
From aesthetic finishing to weld blending, deburring, and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part.