Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

Standard Abrasives™ Buff and Blend Combi-Wheel 898006, 3 in x 1 in x 1/4 in A VFN 120, 10/Carton, 100 ea/Case

Standard Abrasives™

$17.79 / Each

SKU 7000122224
Legacy SKU 66000101460
UPC 00051115425462
Product Number 898006

For added cut, the Standard Abrasives Buff and Blend Combi-Wheel features alternating flaps of Buff and Blend non-woven GP material and coated abrasive resin bonded material. The combination of flaps blends and removes contaminants more aggressively than a non-woven brush, while producing a uniform final finish with a linear scratch pattern.

  • Blends, cleans, and finishes on ferrous and non-ferrous materials when a linear scratch pattern is required
  • Useful for satin finishing on large contoured surfaces
  • Resin coated non-woven mesh material runs cool and resists smearing
  • 1/4˝ (6 mm) permanently affixed shank enables easy use on a small straight grinder or flat finisher (for larger wheels)
  • Steel shank helps maintain smooth running and ease of control for off-hand operations
  • Addition of coated flaps produces a sharper cut than a completely non-woven brush
  Add to cart
On it's way to you April 24   

Qty

Minimum Order 10 Items
Order Increment 10 Items
  Multi-Functional
  Versatile Across Industries
  Easy To Use
  Industry Low Price
Product Dimensions
 Imperial Metric
Diameter 3 in 76.2 mm
Center Hole Diameter 1/4 in 6.35 mm
Shipping Dimensions
Weight 18.49899 lb
Length 23.6878 in
Width 9.75 in
Height 7.9378 in
Color Maroon
Maximum Speed 12,000 rpm
Grit 120

PRODUCT FAQ

  1. What is the Standard Abrasives™ Buff and Blend Combi-Wheel 898006 used for?

    The Standard Abrasives™ Buff and Blend Combi-Wheel 898006 is a versatile abrasive wheel that can be used for blending, polishing, deburring, and cleaning surfaces.

  2. What are the dimensions of this combi-wheel?

    The dimensions of the Standard Abrasives™ Buff and Blend Combi-Wheel 898006 are 3 inches in diameter by 1 inch wide with a quarter-inch shank.

  3. What grit size is available for this product?

    A VFN120 grit size (very fine) is available. This ensures an ideal finish without leaving deep scratches on your surface.

  4. How many wheels come in each package/case?

    There are ten combi-wheels per inner pack. Each case contains one hundred combi-wheels to make sure you have enough supply on hand whenever needed!

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Versatile Utility and Linear Scratch Pattern

The Standard Abrasives™ Buff and Blend Combi-Wheel is a versatile product that is perfect for operations where a linear scratch pattern is desired. It can be used to remove heavy oxidation before painting or plating, finish stamped or extruded aluminum parts, add a grain finish to stainless steel sheets, or create a satin finish on other large surfaces. This product is suitable for both ferrous and non-ferrous metals.

Added Strength for Demanding Finishing Applications

The Combi-Wheel flaps are constructed from tough, resin-reinforced nylon fiber with aluminum oxide abrasive grain, providing aggressive, controlled action and a consistent, uniform finish. This product is more aggressive than a flap brush, which does not incorporate coated abrasive flaps, and less aggressive than a flap wheel, which is entirely constructed from coated abrasive flaps. The addition of coated abrasive flaps in a Combi-Wheel provides added abrasive strength for blending or cleaning in applications where a flap brush needs some extra teeth.

Load-Resistant Construction Boosts Life and Performance

The Standard Abrasives™ Buff and Blend material is load-resistant, which means that it keeps cutting with fresh mineral. The gaps in the open web allow unwanted swarf to escape, reducing the amount of debris that clogs the abrasive. This helps the mineral stay fresh, keep cutting sharp, and deliver a consistent cut over the life of the product. As the fibers break down and fresh mineral is exposed, it reduces the likelihood of dull or blunt mineral smearing the surface, contributing to cleaner surfaces and less re-work. Additionally, manual fatigue that may result from applying heavy pressure to a dull abrasive is reduced.

The Many Benefits of Standard Abrasives™ Buff and Blend

Standard Abrasives™ Buff and Blend products invigorate deburring, cleaning, blending, and finishing applications by helping operators reduce finishing steps, minimize costs, and achieve greater throughput. Each Buff and Blend product and grade offers unique benefits, so operators can choose from a versatile range of options to ensure optimal performance on specific applications. This popular product comes in a broad range of sizes and in two grades, medium (MED) and very fine (VFN), to suit a variety of large and small finishing operations.

Brochures, Catalogs & Data Sheets
  Add to cart