Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

Standard Abrasives™ Rubber Sanding Drum 703077, 1/2 in x 1 in x 1/4 in, 10 ea/Case

Standard Abrasives™

$4.03 / Each

SKU 7000144176
Legacy SKU 66000051848
UPC 00051115375842
Product Number 703077

The Standard Abrasives Rubber Sanding Drum holds an abrasive band for contour work (band sold separately). Constructed from rubber, the drum expands at high speed for the closest possible fit with a band of the same size for controlled operation. This enables it to run smoothly over contoured surfaces and into hard-to-reach areas without skipping or jumping for a smooth, precise finish.

  • Rubber drum enables controlled expansion of a spiral band for proper balance and smooth running at high speeds (band sold separately)
  • Non-slip drum surface securely holds spiral band
  • Enables polishing, finishing and blending on contours when smooth running is essential
  • Pairs with coated abrasive bands or non-woven surface conditioning bands
  • Use same diameter drum and band
  • Range of sizes helps ensure an ideal match between drum size and part for optimal results
  Add to cart
On it's way to you May 3   

Qty

Minimum Order 1 Item
Order Increment 1 Item
  Multiple Application Use
  High Quality Product
  Global Shipping
  Industry Low Price
Product Dimensions
 Imperial Metric
Weight 0.13649 lbs
Width 1/2 inch
Length 1 inch
Height 1/4 inch
Diameter 1/2 in 12.7 mm
Shipping Dimensions
Weight 1.36488 lb
Length 12.08661 in
Width 4.37008 in
Height 4.2126 in
Maximum Speed 15,000 rpm

PRODUCT FAQ

  1. What is the Standard Abrasives™ Rubber Sanding Drum 703077 used for?

    The Standard Abrasives™ Rubber Sanding Drum 703077 can be used to sand and smooth flat surfaces, irregular shapes, contours, and holes in metal or wood.

  2. What size of tool does it fit?

    The 1/2 inch diameter x 1 inch long x 1/4 inch arbor sized drum fits most electric drills and air-powered die grinders.

  3. How many drums are included in a case?

    Each case contains ten rubber sanding drums with identical dimensions.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Smooth, Balanced Application

When it comes to achieving balanced handling, using an abrasive belt may not always be the best solution. In such cases, the Standard Abrasives™ Rubber Sanding Drum, when fitted with a Standard Abrasives™ Spiral Band (sold separately), can be an excellent alternative. The spiral band can be a coated abrasive for polishing and blending, or a non-woven surface conditioning product for effective finishing. The Standard Abrasives™ Rubber Sanding Drum offers an even application on contours and hard-to-reach areas with a rotary tool.

Tips for Optimal Use

For optimal use, it is important for both the drum and the abrasive to have the same nominal diameter to prevent skipping and bumping. The spiral band stays in constant contact with the workpiece to swiftly rid the surface of little burrs, rather than deflecting or skidding over the substrate. The maximum allowable RPM for spiral bands is the same as the maximum RPM of the drum, provided the drum and band have the same nominal diameter. Typically, the rubber drum attaches to portable drills, die grinders, straight shaft and angle grinders. The great news is, the drum requires no extra tools for band changes.

Quality Standard Abrasives™ Solutions for Industrial Applications

For over 50 years, the Standard Abrasives brand has been supplying quality abrasives to the metalworking industry. Customers rely on the broad offering of high performance products including coated, bonded, and non-woven abrasive lines.

Industries
Brochures, Catalogs & Data Sheets
  Add to cart