Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

Standard Abrasives™ Cleaning Pro Disc 843402, 4 in x 1/4 in, 10/Pac, 100 ea/Case

Standard Abrasives™

$9.96 / Each

SKU 7010294948
Legacy SKU 66000035148
UPC 00051115359149
Product Number 843402

The Standard Abrasives Cleaning Pro Disc is ideal for cleaning welds, removing corrosion, rust, scale, paints, varnishes and sealants from difficult-to-reach surfaces. Constructed of large nylon filament, this discs open, non-loading structure performs rapid removal of surface contaminants while producing fine finishes.

  • Can be used for cleaning, finishing and blending on fiberglass and metals
  • Open abrasive design resists loading for faster cut-rates
  • Nylon mesh and silicon carbide combination offers a fine cleaning finish
  • Provides consistent finishes on flat and irregular surfaces
  Add to cart
On it's way to you May 6  

Qty

Minimum Order 100 Items
Order Increment 100 Items
  Multi-Functional
  Versatile Across Industries
  Easy To Use
  Fantastic Price
Product Dimensions
 Imperial Metric
Diameter 4 in 101.6 mm
Center Hole Diameter 1/4 in 6.35 mm
Shipping Dimensions
Weight 3 lb
Length 14.3748 in
Width 14.3748 in
Height 6.75 in
Color Blue
Thread Size Non Pertinent
Maximum Speed 6,000 rpm

PRODUCT FAQ

  1. What is the Standard Abrasives™ Cleaning Pro Disc 843402 used for?

    The disc is mainly used to remove rust, paint, and other coatings from surfaces.

  2. How long does it last before needing replacement?

    The lifespan of this cleaning pro disc depends on how much you use it. It's best to check frequently and replace as needed.

  3. Is the disc compatible with all types of surface materials?

    This Standard Abrasives™ Cleaning Pro Disc 843402 is primarily designed for use on metal surfaces but works well on many other materials too including stone or tile.

  4. Can this standard abrasive cleaning pro disc be reused after initial use?

    While it may appear reusable at times, we recommend not reusing a previously utilized abrasive in order to ensure safety standards while operating heavy machinery.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Silicon Carbide Abrasive

The Standard Abrasives™ Cleaning Pro Disc is a popular choice among industrial professionals because of its fast cut-rate and smooth finish. It is lined with silicon carbide, a very sharp synthetic mineral commonly used in low-pressure applications like paint prep. Although the mineral breaks down faster than aluminum oxide, it produces a finer finish. This makes the Standard Abrasives™ Cleaning Pro Disc best suited for sanding and finishing applications on fiberglass, composites or soft metals.

Open Coat Construction

Abrasives cut better and last longer when dust isn’t clogging the cutting surface. The Standard Abrasives™ Cleaning Pro Disc features open coat construction, which means the abrasive grains are placed with space between them to help evacuate sanding debris and avoid clogging of the grains’ cutting edges. Additionally, the open coat feature provides a more aggressive cut than a comparable closed coat abrasive of the same grade. This all adds up to increased productivity and reduced material consumption.

Quality Standard Abrasives™ Solutions for Industrial Applications

The Standard Abrasives™ brand has been supplying quality abrasives to the metalworking industry for over 50 years. Customers rely on the brand’s broad offering of high performance products including coated, bonded, and non-woven abrasive lines.

Brochures, Catalogs & Data Sheets
  Add to cart