Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
SKU 7010300193
Legacy SKU 70006243367
UPC 00021200385650
Catalog Number 411DL
Product Number 411DL

3M Flexomount Plate Mounting Tape 411DL is a double linered, double coated tape designed for mounting photopolymer and rubber printing plates to flexographic printing cylinders or sleeves. The adhesive is specially formulated for clean removal from both the plate and the print cylinder or sleeve.

  • Offers excellent adhesion to both rubber and photopolymer plates
  • Double linered version of 411
  • Provides uniform coverage of solids when halftone dot reproduction is not critical
  • Specially formulated for clean removal from plate and print cylinder or sleeve
  • High adhesion helps reduce plate edge lifting
  Add to cart
On it's way to you May 21  

Qty

Minimum Order 24 Rolls
Order Increment 24 Rolls
  Premium Quality Tape
  9001 Standard
  Global Shipping
  Industry Low Price
Product Dimensions
Imperial Metric
Weight 0 NULL
Width 0 null
Length 0 null
Height 0 null
Thickness 15 mil
Shipping Dimensions
Weight 65.96892 lb
Length 17.91339 in
Width 17.91339 in
Height 13.30709 in
Color Gray

PRODUCT FAQ

  1. What is 3M™ Flexomount™ Plate Mounting Tape 411DL used for?

    The 3M™ Flexomount™ Plate Mounting Tape 411DL is a double-coated foam tape designed to mount photopolymer and rubber printing plates to flexographic printing cylinders or sleeves. It provides high-quality, permanent bonding of the plate to the cylinder or sleeve.

  2. How long will the tape last after it's been applied?

    Our tests indicate that this product offers an excellent combination of holding power and ease of removal. In normal use, when properly mounted, this product can remain in place for extended periods without deterioration or adhesive residue upon removal.

  3. Is there any specific method I should follow when applying the tape?

    Yes! Always clean surfaces thoroughly before applying our mounting tapes. Then completely remove release liners and apply firm pressure across the surface to ensure a complete bond between substrates. If you need more details on application techniques or troubleshooting tips, don't hesitate to reach out and ask!

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
3M™ Flexomount™ Plate Mounting Tape 411DL

3M™ Flexomount™ Plate Mounting Tape 411DL is a double coated tape that is designed to mount photopolymer print plates and rubber printing plates to flexographic printing cylinders or sleeve systems. It features a soft rubber adhesive that offers excellent adhesion to both rubber and photopolymer plates. The high adhesion helps reduce the tendency for plate edge lifting and makes it a good choice for long runs. This gray double coated tape helps provide uniform coverage of solids when halftone dot reproduction is not critical.

Recommended Applications
  • Mounting photopolymer print plates to flexographic printing cylinders or sleeve systems
  • Mounting rubber printing plates to flexographic printing cylinders or sleeves

For decades, 3M products have been at work in paper mills and printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done. From paper web splicing to plate mounting and packaging the finished job, you can rely on us for solutions and service throughout your operation. Keep the presses running and your customers coming back with 3M™ Flexomount™ Plate Mounting Tape 411DL.

Industries
Brochures, Catalogs & Data Sheets